For Digital Printing CTP Plates, Thermocol plates
Huaguang High Sensitivity Thermal CTP Plate Type TP-A Introduction | ||
Feature | Performance | Excellent dot reproduction, stable performance, big latitude
|
Run length | Unbaked: 100,000 impressions; Baked: 150,000 impressions | |
Cost reduction | High-speed plate, good ink-water balance, quick inking, high usage rate of printing ink. | |
Suitability | Compatible with mainstream thermal platesetter and plate processor, super adaptability
| |
Cost-effective | higher | |
Main technical parameters | Spectral sensitivity | 830nm |
Laser energy required | 130~150mJ/cm2 | |
Resolution | 1%-99% @200lpi. Can be suitable for FM screen | |
UV ink adaptability | Plates need to be baked | |
Baked plate of conditions | 230°C-250°C, 5-8minutes (should be used special gum with baked plate ) | |
Safelight | 2 hours under the fluorescent light and white light. 12 hours under the yellow light. | |
Transport and storage | Store plates flat in their packaging, away from excessive cold, heat or high humidity. Storage Temperature 5 °C -30 °C, humidity is not more than 55%. Recommended condition is: Temperature 10-26°C & RH between 40-70%. | |
Shelf life | 12 months | |
Developer | Huaguang TPD-III | |
Developing temperature | 24°C-26°C | |
Developing time | 20s-30s | |
Dynamically added
| 130ml/m2 | |
Static added
| 110ml/hour | |
Brush rotated speed | 90-100rpm | |
The quantity of plate flushing | 1800 m2-2500m2 | |
Attention points | 1. It's more easily scratched than traditional ps plate, should handle with care. 2. Should set correct parameters, should replace developer in time. 3. Refuse to use the violence to transport ctp plates, should be gently. |
Thickness: 0.30mm, 0.15mm
Positive working
Suitable for Commercial Printing
Stable performance
Product Pictures