foot valve DN400 PN10,PN16
Full Flow Foot Valves are a form of check valve, installed at the bottom of Pump suction line, inside the wet well. Foot valves are an inexpensive way to maintain prime on a single centrifugal pump. The Foot Valve is designed with a 10% larger flow area (including heavy stainless steel strainer) than the pipe size to insure minimal head loss. Since Foot Valves are continually submerged in the wet well and not readily accessible for inspection or repair.
Flange drilled to EN1092-2,Or ANSI Class 125,Class 150,Or 10K
Working Pressure:PN10,PN16
Coating:Blue fusion bonded epoxy(FBE) powder
Body mateiral:ductile iron(GGG40/50)
Strainer:SS304
Components and Materials
No. | Components | Materials |
1 | Body | Ductile iron |
2 | Spring | SS304 |
3 | Broach | Ductile iron |
4 | Three-Jaw | Ductile Iron |
5 | Circle Ring | Ductile iron |
6 | Shaft sleeve | Brass |
7 | Seat | EPDM |
8 | Bolt | 4.8 zn steel |
9 | Strainer | SS304 |
Drawing
Installation
Packed in plywood box.
We are an original manufacturer of ductile iron industrial valves.we can manufactures according to standards,and sample,and drawing that offered by customers.
We can OEM,cast your logo and brand.
Our factory manufacture ductile iron industrial valve for waters for many years.and have exported to UK,Germany,France,Italy,Spain,Morocco,Egypt,SKA,UAE,Russia,Peru,Brazil,Chile etc. many markets,countries and Region.
We,Quanzhou Zhixin Valve Manufacturing CO.,Ltd, are a pressessional manufacturer of ductile iron industrial valves in Luncang,Nan'an,Fujian,China.
Our valve series are:
Resilient seated flanged and socketted gate valve DIN3352 F4,F5,BS5163,AWWA C509,C515
Check valve BS5153,DIN3202 F6,
Flanged double eccentric/centric butterfly valve EN593 IS5752 S13 and S14,
Single orifice and double orifice air valve,
Y strainer DIN3202 F1,ANSI,JIS,BS.
Foot Valve
Q: Are you a manufacturer or a trading company?
A:We are a factory,an original manufacturer,a professional manufacturer of ductile iron valves for water supply and drainage pipeline system.Our factory is located in Luncang Town,Nan'an City,Quanzhou,Fujian province,China,welcome to visit our factory.
Q: Do you have WRAS certificate?
A: We have WRAS certificate for raw materials NBR/EPDM and Epoxy powder
Q: Do you ISO certificate?
A: We have ISO 9001:2015,we also have Certificate of Compliance issued by ECM,and Inspection and verification certificate issued by BV,Inspection certificate issued by SGS.
Q: Could you engrave our Logo/Brand on valve body?
A:We can accept engraving customers' Logo/Brand on valve body,If quantity is big enough; For small quantity,it needs to pay extra cost for engraving logo and brand on valve body.If you require must engrave logo and brand on valve body.
Q: Do you test every finished valve? Or just pick some samples and test it?