Food Grade Halloween Funny Cranium Shape Baking Gummy Candy Mould DIY 3D Silicone Chocolate Mold

You also can click below other styles ice cube mold if you are interested in, mix order is highly welcome!

Specification:
- Easy to clean.
- High temperature resistant: it can withstand 250℃ high temperature.
- Low temperature resistant: it can withstand -40℃ low temperature.
- Can be clean with dishwasher.
Size: 12 x 8.5 x 5cm

How to use:
1. Wash ice tray by hand or in a dish washer before first use. Use dish soap to remove silicone smell if you feel it too strong and that bothers you
2. Fill lower tray 2/3 or half with liquid of your choice. (Too much liquid would make it hard to use the trays and too less liquid would not make good looking skull shape ice cubes. Start with 2/3 of liquid and see if it was the right amount. You can adjust amount of liquid and you will know the right amount soon)
3. Fit upper tray into lower tray and gently press down until excessive liquid comes out through the small holes on top and inner grooves are interlocked.
4. Place ice tray upright in your freezer and freeze for 6 hours or longer. (For chocolate, 15 minutes is good enough)
5. Twist ice tray in all directions to break up skull shape ice cubes. Open and remove ice cubes from trays. (The more you twist the better looking skull shape ice cubes come out because it helps to remove the thin layers of ice around the skulls.)

NOTE:
The small holes on top is not there to fill liquid in. It is for excessive liquid to come out through. If you want to have bigger holes so that you can fill your liquid in through the holes on top, you can easily cut each hole with an ordinary scissor that you have at home.

Important Note:

-This mold may be not as large as you imagine;please pay attention to size info before you make payment.

- Before use: please clean and then disinfect in boiling water.

- After use: Please clean and keep it away from direct sunlight.

- Mold should keep flat in baking tray, don't bake mold only.

1. Before first using, please wash with hot water or a cleaning agent to remove surface dust.
2. Don't use on open flames or over a direct heat source.
3. Don't pull and impact it violently or scratch it with sharp things.
4. Don't use abrasive soap or scouring pad to clean them.
5. In order to avoid the dust, don't direct exposure it to the air for a long time.