Flipsky 12S brushless dc motor 6354 Belt Electric Skateboard Motor

Product Spec

• Max Power: 2450 Watts
• Max Current: 65 Amps
• Max Volts: 12S 
• Max Torque: 7Nm
• Motor Resistance: 0.053Ohm 
• Recommend ESC: 3-12S 50A (FSESC4.12 50A or FSESC 6.6 60A)
• Weight: 1.23 lb / 0.56 kg
• The motor length:54mm
• The motor diameter: 63mm
• SHAFT: Diameter 8mm, 24mm length, 3x3x15mm keyway slot.
• Motor Wire: 130mm silicone 12AWG wire with 4.0mm Gold Bullet Connector Male.
  • Wire configuration:
    • Blue = A
    • Black = B
    • Yellow = C 
• BLDC Motor
• The number of pole: 14

Sensor Wire: Standard RC Sensor Wire JST-ZH 6pin 1.5mm pitch

• Internal PCB with 120 Degree Hall Effect Sensors.
• Motor can be used with or without a sensor. Sensorless operation is most common.
• VESC Sensor Wires required to use with VESC.
• Wire configuration:
  • Red = 5v
  • Blue = A
  • Yellow = C
  • Green = B
  • Black = GND

What's Our Product Feature?

• Stator: Lamination Japan steel
• 12awg high strand silicone wire with 4.0mm gold bullet connectors.
• Both support sensor and sensorless mode! 

What's Included?

• 6354 190KV EPOWER Motor (Fits 63mm Motor Mount)

Reference Information

• The screws used for the motor are M4 metric bolts. Using our motor mounts, we recommend using M4 Socket Cap bolts.
•  Screws to mount the motor are not included with the motor.
• The key for keyawy is not included with motors for shipping
• The mechanical diagram:

Anti spark pro

Mini FSESC4.20

Why choose Flipsky VESC?

1.Flipsky ESC owns many functions that a normal RC ESC does not owns.
A.To set the range of current that comes from battery to motor. Normally a motor is easily burned up by sending it more current than it can handle for too long(often while riding up a hill). This will not happen to FSESC if you have set up a safe current range for it.
B.There's also many other protections that can be set through limits, such as the the temperature(so you can avoid to burn up your speed controller), min and max voltage(so you can set your battery voltage in the safe range according to your battery spec), and max regenerative break current (protect battery from being over-charged)
2.FOC(Field Oriented Control) makes the motor more smooth and less noise and even save much power.
3.It's widely used by DIY market. DIY market people has higher requirement on product quality.They know much more details of product.

Shipping time: WIthin three days on weekdays

Shipping method: mail(within 15days)/DHL(within 7days)

Company Information

Company Profile

  FLIPSKY Technology Co., Ltd was set up in 2017. It grows up quickly and powerfully. We have our own design team, manufacture team including the workshop, marketing and sales department. FLIPSKY mainly focus on second innovation research and development basing on the latest international electronic intelligence technology, manufactures and sells electronic intelligent control products and peripheral accessories.

  The co-founders of FLIPSKY is a group of passionate and innovative post-80s technology enthusiasts. They have been in the electronics intelligent automation industry for nearly 10 years and are skillful from circuit design to PCB layout, embedded software&hardware development, component selection and performance evaluation, product testing, SMT/DIP production and process quality control. Each process is fully experienced and well performed. In addition, the product mechanical designer is from TTI, who designed the RYOBI Brushless Driver Kits and other well-known products. 

  The vision of FLIPSKY is to maximize the use of latest international technology and to change life by it. FLIPSKY's products can be applied in electric skateboards, electric vehicles, scooters, car models, ship models, robots and industrial equipment and other industries. 

  We hope that more and more international companies and consumers will truly feel the progress that technological innovation has brought to our lives.

Contact Information

FAQ

1.  Q: Can the KV value be customizable?

     A: Yes, and the extra cost is about 5USD per unit.

2.  Q: Can you do the motor without logo?

     A: Yes. Both logo customization or no logo can be acceptable if the order q'ty can fulfill the MOQ.

3.  Q: Is it FOC capable?

     A: Yes. Modes DC. BLDC, FOC (sinusoidal) are capable.

4. Q: Do you offer it with an integrated starter?

    A: Yes. We have the latest plus version with integrated starters for FSESCV4.20&V6.6.