Our expansion joints:
Expansion rubber joints are assembled on the piping,which can reduce the vibration,reduce noise,protect pipe system from start-up forces as well as system surges,compensate movements and misalignments from the piping line.Reinforcement of the bellows is impregnated with nylon cords and hardened with steel wire rings at both ends.
Applications include, but are not limited to:
Commercial HVAC systems Advantages:
Industrial piping systems Vibration isolation
Power plants Multiple elastomers available
Marine systems Small face-to-face dimensions
Sewage treatment plants Single or multi-sphere configurations
Waste water systems Reduces pipeline harmonics
our production process quality control:
We treasure process quality control, there is very strict operation specification each process, which can ensure the goods quality:
1. We use electronic weigher to weigh the weight of ingredients, the precision of weight is gram. So there is no surplus compounds elements;
2. 1.) By controlling material temperature and mixing time in the mixer machine, we can get qualified rubber mixed composites.
2) The calender process is the more critical phase, large steel rollers force rubber composites into smooth rubber sheets.
3)The rubber sheets produced every day must be finished within the same day, we can ensure no rubber sheet remainder each day.
4) All rubber sheets have passed the test of curometer.
3. Adding adhesion agent in the mixture of rubber and nylon tire cord, then the rubber and nylon tire cord can be adhered together and turn into the integral. After vulcanization, all the rubbers are adhered tightly, it is very difficult to delaminate.
Below is the pictures of plastic sheet combined with rubber and nylon tire cord:
4. In wrapping process: all the elastomer constructions are made by hand-built and machine. After hand-builting, the underneath pressing roller moves along the elastomer body and compact the rubber sheets. There are two main functions of the roller, one is compacting the rubber sheets and making the rubber sheets more bonded, the other one is extruding air between rubber films. So it is very difficult to generate blisters and delamination after vulcanization.
5. After vulcanization, there are 4 inspection processes: first qualified products inspection, trimming, assembling process, inspection for finished goods, if the goods with blisters are found then scrap.
Our available goods:
Specifications |
I |
II |
III |
Working Pressure Mpa (Kgf/Cm2) |
1Mpa (10) |
1.6 (16) |
2.5 (25) |
Test Pressure |
1.5Mpa |
2.4Mpa |
3.75Mpa |
Burst Pressure Mpa (Kgf/Cm2) |
3 (30) |
4.8 (48) |
5.5 (55) |
Vacuum Kpa (Kgf/Cm2) |
53 (400) |
86(660) |
100 (750) |
Materials |
EPDM/NBR/SBR/NR /Neo/Lined with PTFE |
||
Diameter Range |
DN15-DN600 (11/2"-24") |
||
Connection Method |
FLANGE\THREAD\CLAMP |
||
Flanges Dimensions |
DIN, EN,ANSI, BS, JIS and other standards |
||
Applicable Medium |
Air, compressed air, water, seawater, hot water, oil, acid, alkali etc. |
||
Loading Port: |
Qingdao, China |
||
Shipment Terms: |
FOB, CFR, CIF |
||
Production Capacity: |
250000 set |
||
Payment Terms: |
L/C, T/T, D/P |
||
Connection: |
Flange |
||
Flange Material: |
Carbon Steel, Stainless Steel |
||
Period of Delivery |
about 21 working days |
Our certificates:
Our workshop:
Our Test instruments:
Hot-ageing oven
Electronic Universal testing machine
hydrostatic test
Rotorless Vulcanizer
Low Temperature Testing Oven
Digital density balance