Flexible Diamond Belts / Flexible Diamond Abrasive Tool Sanding Belt

Flexible Diamond Belts

  Flexible Diamond Abrasive Tool Sanding Belt

Restar offers a wide range of coated abrasive belts for different industries, including narrow belts for a portable machine or wide belts for stainless steel coil finishing.

With the size ranging from 1/8” wide to 600” length in multiple grains and backings, we can deliver nearly any belt needed for your required application. 

Introduction & Features:

Diamond Flap Disc /CBN Flap Disc 

GRIT | Diamond CBN/40# 600#
SPEC.| Φ100*16 Φ115*22 Φ125*22
APPLICATION|
Diamond Flap Disc is used in grinding and polishing stone,glass,ceramicce,mono-crystal silicon,polycrystal silicon,synthetic material,cemented carbide,alluminium alloy,etc.

Diamond /CBN Belt

GRIT | Diamond CBN/40# 5000#
SPEC.| width: 5mm -30mm 
APPLICATION|
CBN sand belts are mainly used in polishing Fe-based alloy,titanium alloy,stainless steel,high temperature alloy and so on.

Diamond Spiral Band

GRIT | Diamond CBN/40# 5000#

SPEC.| 10-100mm

APPLICATION|

Diamond Spiral Band is used in grinding and polishing stone,glass,ceramicce,mono-crystal silicon,polycrystal silicon,synthetic material,cemented carbide,alluminium alloy,etc.

Diamond Hand Pad/Block

GRIT | Diamond CBN/40# 5000#
SPEC.| 10-100mm
APPLICATION|

CBN hand pads It is mainly used in polishing Fe-based alloy,titanium alloy,stainless steel,high temperature alloy and so on.

Our Strength

Restar Technology co. Is a reputed manufacturer and supplier of Coated Abrasive Products and more. Our broad range of Coated Abrasive Products include Coated Abrasive Flap Wheels, Abrasive Belts, Spindle Mop Wheels, Abrasive Rolls, Portable Sander Belts, Radial Flap Discs (Cup Wheel), PSA Discs, Cloth Discs, Abrasive Sheets, Mounted Points (Grinding Wheel), Fibre Discs, Non Woven Wheels, Non Woven Wheel With Spindles and Felt Discs.

Our speciality is that we produce both high grade raw materials and finished coated abrasive products meanwhile, so as to make our products more reliable and cost-saving.

Our aim is to go beyond selling products, but offer you individual polishing solutions in diverse industries such as Automotive Industries, Cycle & Motor Cycle Industries, SS Fabrication Industries, Hand Tool Industries, Paper Cone Industries, Wood Working Industries, Plywood Industries and Ferrous & Non-Ferrous Industries. 

Our Advantages 

• 25 Years Manufacturer's Experience

• 2 Production Iines and 4 Converting Producton Lines

• Domestice and imported Materials

• Advanced Equipment and Professional technicians.