Aluminium Pipe Elbow
Shijiazhuang Dingsheng Pipe Co.,ltd
We currently stocks eight alloys of aluminum in various shapes and sizes:
(available in Hex, Round) |
|
(available in Hex, Plate, Rectangle, Round, Sheet, Square, Tube) |
|
(available in Sheet) |
|
(available in Angle, Channel, Hex, I-Beam, Pipe, Plate, Rectangle, Rectangle Tube, Round, Sheet, Square, Square Tube, Tube) |
|
(available in Angle, Channel, Pipe, Rectangle, Rectangle Tube, Round, Square Tube, Tube) |
|
(available in Pipe, Rectangle) |
|
(available in Hex, Round) |
|
(available in Hex, Plate, Rectangle, Round, Sheet, Square) |
6061 Aluminum is, by most any measure, the most commonly used aluminum alloy. It is specified in most any application due to its strength, heat treatability, comparatively easy machining, and weldability. If that were not enough, it is also capable of being anodized, adding a layer of protection for finished parts.
The main alloy ingredients of 6061 aluminum are magnesium and silicon.
6061-T6 Aluminum |
||
Physical and Mechanical Properties |
Ultimate Tensile Strength, psi |
45,000 |
Yield Strength, psi |
40,000 |
|
Brinell Hardness |
95 |
|
Rockwell Hardness |
B60 |
|
Chemistry |
Aluminum (Al) |
95.8 - 98.6% |
Chromium (Cr) |
0.04 - 0.35% |
|
Copper (Cu) |
0.15 - 0.40% |
|
Iron (Fe) |
0.70% |
|
Magnesium (Mg) |
0.8 - 1.2% |
|
Manganese (Mn) |
0.15% max |
|
Silicon (Si) |
0.4 - 0.8% |
|
Zinc (Zn) |
0.25% |
6063 Aluminum Pipe Elbow
6063 is often called architectural aluminum for two reasons - first, it has a surface finish that is far smoother than the other commercially available alloys, and second, its strength is significantly less (roughly half the strength of 6061), making it suited for applications where strength is not the foremost consideration.
6063 is rated as "Good" for forming and cold working operations, "Excellent" for anodizing, and "Fair" for machining.
6063-T52 Aluminum |
||
Minimum Properties |
Ultimate Tensile Strength, psi |
27,000 |
Yield Strength, psi |
21,000 |
|
Brinell Hardness |
60 |
|
Chemistry |
Aluminum (Al) |
97.5% max |
Chromium (Cr) |
0.1% max |
|
Copper (Cu) |
0.1% max |
|
Iron (Fe) |
0.35% max |
|
Magnesium (Mg) |
0.45 - 0.90% |
|
Manganese (Mn) |
0.1% max |
|
Silicon (Si) |
0.2 - 0.6% |
6101 Aluminum Pipe Elbow
6101 is best suited for applications involving moderate strength and maximum electrical conductivity. It is similar to alloy 6063, but with minor chemistry changes which enhance electrical conductivity. Although slightly lower in conductivity than alloy 1350, it offers greater strength. Its most typical application is bus bar.
6101-T6 Aluminum Pipe Elbow |
||
Physical and Mechanical Properties |
Ultimate Tensile Strength, psi |
32,000 |
Yield Strength, psi |
28,000 |
|
Brinell Hardness |
71 |
|
Electrical Conductivity |
57% IACS |
|
Chemistry |
Aluminum (Al) |
97.6% |
Chromium (Cr) |
0.03% |
|
Copper (Cu) |
0.10% |
|
Iron (Fe) |
0.50% |
|
Magnesium (Mg) |
0.35 - 0.80% |
|
Manganese (Mn) |
0.03% max |
|
Silicon (Si) |
0.3 - 0.7% |
|
Boron (Si) |
0.06% |
Aluminium pipe elbow
Aluminium Pipe Elbow
Aluminium Pipe Elbow
Aluminium pipe elbow
Aluminium Pipe Elbow
FAQ:
1.Q:Are you factory/manufacture/distributor?
A:Yes,we are manufacturer specializing in producing alloy steel /carbon steel/aluminium steel pipes fittings.
2..Q:What About The Delivery Time ?
A:It Takes About 20 Days For Trial Order And About 30 Days For Official Order.
B:A: Generally it is 1-2 days if the goods are in stock.
3.Q:Do you have the products in stock?
A: Depends on your request,We have standard models in stock.Some special products and big order will be newly produced according to your order.
4.Q:How can I trust you?
A:Our company is honesty and loyalty,we are the alibaba' gold supplier,now we have clients all around the world.