Fish pond micropore rubber aeration hose for aquaculture
Fish pond micropore rubber aeration hose for aquaculture
Since a majority of all aquaculture problems, including disease, are caused by poor water quality and, in turn, most water quality problems can be resolved with proper aeration (oxygenation), it is clear that aeration plays a crucial role in this process.
Oxygen is the main limiting factor in both recirculating and traditional aquaculture systems. Less than the required levels lead to poor water quality, poor feed conversion ratios (FCR), reduced growth and increased mortality. With high energy prices, energy efficiency is becoming much more important when comparing aeration techniques and devices.
Aeration hose achieves its high energy efficiency in two ways:
Due to the number of micropore created during our manufacturing process, there is little resistance created when pushing air through the hose. Resistance equals energy demand. By working with aeration hose, you can use significantly less horsepower when compared with traditional methods of aeration (paddlewheels, aspirators, less efficient tubing).
Aeration hose tiny micropore size creates extremely small diameter bubbles. The smaller a bubble of air the more efficiently it transfers oxygen into water (more surface area!). Small bubbles also take longer to rise once they are introduced into water. Slower rising, small-diameter bubbles mean more contact with the water and a much higher rate of oxygen transfer.
By creating significantly smaller bubbles, more efficiently, aeration hose products are able to deliver high rates of oxygen transfer and energy efficiency.
The benefits of fish pond aeration:
l Reduce algal blooms
l Increase dissolved oxygen
l Increase water clarity
l Eliminate stress to shrimp, fish(Fishkills)
l Improves livestock, shrimp fish health
l Allows for higher stocking densities
l Allows for more frequent feedings
l Faster growth and reduced
l Diminishes noxious odors
The benefits of aeration hose:
l Reduces energy costs by up to 75%
l Bubbles size 1-3mm
l Maintains higher dissolved oxygen (DO) levels
l Allows for higher stocking densities
l Allows for higher feeding rates
l Allows for more frequent feedings
l Faster Growth and reduced FCR
l Low start up cost
l Reducing noxious odors NH2, NO2, H2S,...
l Supporting aquatic organisms
l Improving the quality of fisheries
l Easy installation
Fish pond micropore rubber aeration hose for aquaculture Spec | |
Outer diameter(mm) | 25 |
Inner diameter(mm) | 13 |
Wall thickness(mm) | 6 |
Metres heavy(g/m) | 310 |
Packing quantity(meters/roll) | 100 |
The bubble diameter | 20-50 um |
| Dynamic power | 02 / kw. Hr |
| The air flow | 1.5-5 cubic meters/m.Hr |
| Applicable water depth | 0-5 meters |
Cold resistance(-40°C,8h) | Tensile length ≥2.2 Mpa |
Tensile elongation ≥130 percent | |
Hot empty aging (70°C 72h) | Tensile strength rate ≤20 percent |
Break elongation rate ≤20 percent | |
Resist 5% NaOH (23°C 72h) | Tensile strength rate ≤20 percent |
Break elongation rate ≤20 percent | |
Resist 5% HCl (23°C 72h) | Tensile strength rate ≤20 percent |
Break elongation rate ≤20 percent | |
Pressure | s-1 200Kpa (water seepage amount) 600-800ml/h.m |
s-2 200Kpa (water seepage amount) 10.8l/h.m | |
200Kpa (increase Oxygen amount) 420ml/h.m | |
Fish pond micropore rubber aeration hose for aquaculture details:
Production line:
Aeration hose Applications:
Aeration hose technology has been used successfully with a wide range of Aquaculture species and in a wide range of production systems.
Whether you are producing shrimp or fish, anywhere you are using traditional aeration systems to oxygenate your water, you can benefit from the efficiency and durability of an nano aeration hose system.
Other sizes of aeration hose:
Size | Type | Out diameter (mm) | Inner diameter (mm) | Wall thickness (mm) | Weight (g/m) |
10 | C/BC/B | 10 | 7 | 1.5 | 45 |
14 | C/BC/B | 14 | 9 | 2.5 | 85 |
16 | C/BC/B | 16 | 10 | 3 | 115 |
18 | C/BC/B | 18 | 11 | 3.5 | 150 |
20 | C/BC/B | 20 | 13 | 3.5 | 160 |
21 | C/BC/B | 21 | 13 | 4 | 200 |
22 | C/BC/B | 22 | 14 | 4 | 205 |
25 | C/BC/B | 25 | 17 | 4 | 240 |
15 | 5 | 195 | |||
13 | 6 | 310 | |||
11 | 7 | 335 | |||
28 | C/BC/B | 28 | 20 | 4 | 290 |
Jiangyin Jiangda Machinery And Equipment Co., Ltd. is a manufacturer of rubber products and plastic products, with well-equipped testing equipment and strong technical force. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in fishery and other industries.
Our company was founded in 1994, with 25,000 square meters, and 15,000 square meter buildings, and assets of 50million Yuan. We are a professional manufacturer in the field of aquaculture equipment, with more than 20 years' manufacture experience. We have a whole set of equipment and techniques in the design, manufacture and after sales services. We have more than 25 main technicians with junior college certificates in technical R&D department.
We manufactured the first set of self sinking aeration hose in our country, and filled up the country blank in this filed. We develop new products with the enterprise spirit of "Solidarity and Progress, Honesty and Innovation, Researching Science And Technology, Developing Future". We have successfully developed “Jiang Da micropore rubber aeration hose”,this product can effectively add disvoled oxygen and improve breeding density.And increase Farmers income.At the same time,our product can be widely used in river regulation,wastewater treatment and so on.
Our hundreds of kinds of products are welcomed in domestic and overseas markets. Our company has been established for more than 20 years, and always takes the market requirements as our guidance, the clients' satisfaction as our rule, the self-innovation as our development method, and the improvement of our competitive power as our target. We welcome new and old customers at home and abroad to visit our company, and establish friendly and cooperative business relationships with us.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier