Fire Hydrant Fire Hose Landing Valve John Morris Type Valve

Fire Hydrant Fire Hose Landing Valve John Morris Type Valve

Landing valves are suitable for installation on wet risers in a building for fire fighting purposes with permanently charged water from a pressurised supply.

The landing valves are Right-Angle type with screwed inlet and are manufactured to comply to BS 5041-1 standard with delivery hose connection and blank cap complying with BS 336 standard.

The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.

• Conformed to BS 5041-1 standard.
• Inlet: Flange BS4504 PN16, PN25 or ANSI#150, #300FF
  Outlet: 50mm BS336 Female Instantaneous
  Optional: Thread Outlet
• Gunmetal or Red Painting Finishing
• Monel Stem is available upon request.

  Size	2.5"
  Material	Body: Gunmetal BS 1400 LG2 /Aluminum Bronze/Brass (by request) Hand Wheel: Ductile Iron Blank Plug: Plastic with SS Chain  Optional: Gunmetal or Brass Plug
  Type	Right Angle X Flange Type Inlet: Flange BS4504 PN16, PN25 or ANSI#150, #300FF Outlet: 65mm BS336 Female Instantaneous Optional: Thread Outlet
  Pressure	Working Pressure: 16 bars Testing Pressure: Seat 16.5 bars / Body 22.5 bars