Detail:
Our fiberglass rope is constructed of high-quality Type E Fiberglass yarns, knitted into both soft and dense rope forms. Fiberglass rope will not burn and is suitable for use in continuous temperatures to 1000°F (540°C). Common applications for fiberglass rope include seals for boilers, ovens and stoves as well as high temperature industrial packing and expansion joints. Most fiberglass ropes can be wire jacketed with stainless steel mesh for abrasion resistance, coated with high temperature silicone elastomer, over-braided with fiberglass or supplied with a pressure sensitive adhesive (PSA) to ease initial installation.
Description:
1. Highly flexible and conformable
2. Include door seals or caulking material for ovens, furnaces, boiler
3. Competitive prices based on same quality because we are manufacture.
4. Guarantee samples quality same as mass production quality
5. Size and color can be according to customer's demand.
Application:
It suitable for sealing doors and lids on solid fuel stoves and boilers around the flue pipe where it goes through the register plate, instead of cement which will fall out!you can also use it in flue pipe joins as many stove collars are often larger than the stove pipe, when the gap is too large to fill with fire cement alone you can push stove rope in to the joint first to fill most of the gap.
Glass type |
E-Glass, C-Glass |
Filament |
9-11µm |
Diameter(double layer) |
6-16mm |
Refractoriness |
600℃ |
Weight |
60g-160g/m |
Roll length |
30-200m |
Thermal conductity coefficient |
<0.035 Kcal/m.h. ℃ |
Moisture content |
<0.5% |
Size: | customized |
Color: | customized |
Packaging: | customized |
shape: | customized |
length: | customized |
can customize for you according to your requiredment.We support OEM.
<< Just Tell us : length, size, color etc. required >>
user's guidance:
• Be sure stove is cold.
• Wear protective gloves and eye protection.
• Protect work area with a drop cloth.
• Use a screwdriver or scraper to remove old gasket and clean door channels down to bare metal.
• Apply a bead of gasket cement in door channel.
• Press new gasket into wet cement and close door to check for airtight fit.
• Trim gasket as needed.
• Clean up all cement spills or excess immediately with wet cloth.