Width: 25mm or OEM
Overall Thickness: 0.6mm or OEM
Introduction
Fiberglass Silicone Tape incorporate a sinusoidal fiberglass fabric that gives a controlled elongation and increased tear resistance and tensile strength of the tape. It has a minimum elongation before fracture of 25%, The reinforcement has excellent mechanical characteristics while allowing the tape to conform to irregular shapes.
Feature
The tape has no adhesive, but sticks to itself (self-fuses or self amalgamating) when stretched and wrapped onto itself. The tapes starts curing within minutes, and after several hours cannot be unwound or removed without using a sharp knife or blade. This tape makes a waterproof, weatherproof and air tight protection.
This tape is available in many colors, but clear, oxide-red and black are the most common. The tape has a built-in fiberglass sinusoidal reinforcement limiting the amount of elongation (either a maximum of 15% or 25%).
Application
1.Automotive repair
2.Jacketing high voltage terminations
3.Motor lead insulation
4.Boat rigging wrapping
5.Flexible heater repair
6.Extension cord "connection" wrapping
7.Heavy duty industrial pipe wrapping
8.Tool handle wrapping
9."Final wrap" for Electrical distribution connections
10.Power & hand toll insulation
11.Underwater uses
12.Emergency radiator hose repairs;emergency insulating&barrier tape
13.Fishing industry uses
14.Military applications
15.Insulating generator coils
16.Temporary hose repairs
17.Harness wrapping: automotive, aircraft, protective
18.Water hose/ Air hose/ Turbo hose
19.Plumbing leaks.
20.Insulation of electrical wiring
21.Repair damaged cable housing