Model | Density (kg/m3) | Thickness (mm) | Width (mm) | Length (mm) | Thermal conductivity (W/m·K) |
HYGW10 | 10 | 50 | 1200 | 30000 | 0.044 |
75 | 1200 | 20000 | |||
100 | 1200 | 15000 | |||
HYGW12 | 12 | 40 | 1200 | 30000 | 0.042 |
50 | 1200 | 30000 | |||
75 | 1200 | 20000 | |||
100 | 1200 | 15000 | |||
HYGW16 | 16 | 25 | 1200 | 30000 | 0.039 |
50 | 1200 | 15000 | |||
75 | 1200 | 10000 | |||
100 | 1200 | 7500 | |||
HYGW24 | 24 | 25 | 1200 | 20000 | 0.036 |
50 | 1200 | 10000 | |||
75 | 1200 | 10000 | |||
100 | 1200 | 5000 | |||
HYGW32 | 32 | 25 | 1200 | 20000 | 0.035 |
50 | 1200 | 10000 | |||
75 | 1200 | 10000 | |||
100 | 1200 | 5000 | |||
HYGW48 | 48 | 25 | 1200 | 20000 | 0.032 |
50 | 1200 | 10000 | |||
75 | 1200 | 5000 | |||
100 | 1200 | 5000 |
Tested Content | Test Method | Tested Value | ||
Density | GB/T 5480.3 | 10-80 kg/m³ | ||
Temperature Range | ASTM C411 | Up to 350 °C | ||
Thermal Conductivity | ASTM C518 | 0.027 (W/m·K) | ||
Water Content | GB/T 16400-2015 | ≤1% | ||
Corrosion Resistance | ASTM C665 | No Chemical Reaction | ||
Mold Resistance | ASTM C665 | Mildew Proof | ||
Slag Ball Content | GB/T 5480.5 | 0.1 | ||
Average Diameter of Fibers | GB/T 17795-2008 | 5-8 μm | ||
Moisture Absorption | ASTM C1104 | <1% by weight (Temperature: 49 °C, Relative Humidity: 95%) | ||
Fire Test | ASTM E84 BS 476 Part 6&7 | Flame Propagation: <25 Flame Diffustivity: <50 | ||
Grade of Combustibility | GB/T 8624-2012 | Non-combustible Grade A |