Crude raw fiber analyz:LFA-06
LFA-06 Raw Fiber Analyzer assimilates samples based on the common acid & alkali assimilation method, and gets raw fiber content by weight determination which is suitable for testing raw fiber content of all kinds of feed, foodstuff, grain, food and so on.
1. Description
The instrument adopts acid and alkali of accurate concentration and assimilates under certain conditions. After removing the soluble substance by alcohol and burning the rest solution at high temperature, the residue minus the mineral is called raw fiber. However, it’s not an actual chemical substantiality, while it is only a measured compendium ingredient under legal compelled regulation. Fiber is its main content, while a little fiber and xylogen are also contained.
2. Specification
Measuring object |
Raw fiber content in various kinds of grain, food, feed and other agricultural and sideline products |
Measuring sample quantity |
6pcs / time |
Repeatability error |
raw fiber level < 10%, absolute value error ≤0.4% |
raw fiber level >10%, absolute value error ≤ 4% |
|
Measuring time |
about 100min (including acid 40min, alkali 40min, filter and wash 20min) |
Power |
AC220V/50Hz,2800W |
Water supply |
water pressure >1.5Mpa |
water temperature <20℃ |
|
Dimension |
670x450x670mm |
Weight |
35kg |
Dietary fiber analyzer:LDF-602
1. Feature
1. The whole process without transferring samples, to avoid operating errors
2. Set of enzymatic hydrolysis, stirring, heating, constant temperature, plus liquid, precipitation, pumping in one
3. Mobile semi-circular silicon carbide heater, heating fast and stable, safe operation
4. Special filter pump, fiber patented products, apply to all corrosive solvents
5. Pneumatic function to ensure thorough digestion of the sample
6. Directly control the temperature of the enzymatic hydrolysis of the liquid, the enzymatic effect to achieve the best condition
7. 7-inch ultra-fine color screen, touch screen control, the interface avant-garde fashion is simple and simple
8. Heater detection in place
Core Technology:
1. Special filter pump:Fiber patented products, 30 years of industry experience developed a unique formula raw materials. Applicable to all corrosive solvents, the use of a wider range, fully reflects the fiber inspection technology and strength;
2. Integrated ant- misoperation interface design:Completely avoid the wrong button caused by the misuse, reflecting the ultimate concept of human nature;
3. Special condensing tube:Integrated condensation and liquid integration, flexible and convenient operation;
4. Pneumatic function:Without the need for agitator immersed in the sample, eliminating the sample sticking to the stirrer is difficult to clean the error caused, but also to avoid the risk of rocking stirring;
5. Rise and fall timing dual system:Designed for dietary fiber design tailored temperature control;Breaking the conventional only temperature control timing mode, to avoid the cooling temperature control time error;
2. Specification
Display |
7-inch ultra-fine color screen, touch type |
Test range |
0 - 100% |
batch processing time |
3 hours |
Analysis of temperature range |
room temperature ~ 200 °C |
temperature control mode |
cooling temperature double system control |
Temperature control accuracy |
±0.5°C |
Mixing method |
pressure mixing, no interference, no mutual contamination |
Standard deviation of results |
≤ 0.5% |
Recovery rate |
≥99% |
Environmental protection |
No need for constant temperature water bath and filter bottle, no peculiar smell drift, ordinary standard laboratory can |
Anti-error performance |
no sample transfer, all enzymatic and washing filtration, directly on the instrument; |
Number of samples |
Test 1 to 6 samples at a time |
Heating method |
mobile semi-circular silicon carbide heater |
Power source |
220V±10%, 50~60HZ |
Rated power |
2000W |
Dimension |
700×400×600 (mm) |
Weight |
40 kg |