Features:
Cable introduction A1 - Adapter Cable 1 (green)
A2 - Adapter Cable 2 (red)
A3 - Adapter Cable 3 (Yellow)
A4 - Adapter Cable 4(Purple)
A5 - Adapter Cable 5 (Blue)
A6 - Adapter Cable 6 (gray)
A1/ Green ABS / Power Sreeing adapter lead ( "Adapter 1" on MultiECUScan website) -Designed to allow access to the ABS and Power Steering systems on supported vehicles. This adapter has a green connector on one end for easy identification. Using this adapter, Pin 7 on the diagnostic tool is connected to Pins 1,7,9 &12 on the car.
A2/Red Airbag adapter lead ( "Adapter 2" on MultiECUScan website) -Designed to allow access to the Airbag system on
supported vehicles. This adapter has a red connector on one end for easy identification. Using this adapter, Pin 7 on the
diagnostic tool is connected to pin 3 only pn the car.
A3/Yellow CAN adapter lead ( "Adapter 3" on MultiECUScan website) -Designed to allow access to the low-speed CAN system on supported vehicles. This adapter has a yellow connector on one end for easy identification. Using this adapter, Pin 6 & 14 on the diagnostic tool are connected to pins 1 & 9 Respectively on the car, Pin 7 on the diagnostic tool is connected to pin 12 on the car.
A4/Purple Electric hood adapter lead ( "Adapter 4" on MultiECUScan website) -Designed to allow access to the electric hood system on supported vehicles. This adapter has a purple connector on the end for easy identification. Using this adapter, Pin 7 on the diagnostic tool is connected to pins 7,8,11 & 13 one the car.
A5/Blue Control Module Adapter Wire Design allows access to enhanced features on the vehicle (eg, multimedia, blind spot sensors,etc.)
A6/Gray base control module adapter wire designed to allow access to basic functions on the vehicle (eg headlights, parking controller, ABS, electric steering, etc.)