The laser slag/dross cleaner cleans the slag or dross which produced by laser cutting on the worktable. Thoroughly
cleaning will extend the service life of your laser cutting bed gratings and ensure good quality laser cutting result.
Features:
Fast speed: The speed is several times faster than manual cleaning.
Safe under-stage operation: the equipment has a long handle and good operation performance, and the cleaning work
can be completed under a single person.
High flexibility: flexible and convenient operation, only need to lift the extension rod for line change, no need for workers
to go on stage to carry and change lines.
Convenient to carry: the whole machine is small in size, light in weight, and has walking wheels, which is convenient to
carry.
Reduce workload: Compared with time-consuming and laborious manual cleaning, it can reduce the workload by 40%.
Cost reduction: Compared with the cost of regular replacement of the sword fence, it can save up to 75% of the cost
through multiple cleanings.
Technical Specifications | |||
Input Voltage | 220 VAC, single phase | Max dross/slag width | 25 mm (0.98’’) |
Rated Power | 2300 W | Grating distance | Min 35mm |
Slat Thickness | 2-5 mm ( 0.08--0.19’’) | Machine weight | 28KG |
Total weight | 41KG | ||
Speed | 1400 r/minute | Overall Length | 2.3 m ( 90") |
1.Amazing cleaning results
Totally remove the accumulation of slag due to our unique design and process of the laser grates plate cleaner.
2.Suitable for all brands laser cutters
For use on most manufactures, such as Bystronic, Trumpf, Amada, Mitsubishi, Mazak and more, both CO2 and fiber type laser machines
3.Suitable for diverse metal slag
Well-suited for a variety of materials such as mild steel, aluminum, stainless steel, copper.
4.Simultaneous cleaning and production
If your laser cutting machine has shuttle worktable, can clean the grating plates / slat during the cutting process..
5.Operated by one person
With the long handle, need only one person to clean the slats effortlessly.
6.Cost reduction up to 80%
With the dross cleaner, you can clean the grating plates multiple times before they need to be replaced.
1.Q: Can the Slat Cleaner be used on different brands laser cutting machines?
A: Sure. Sure. Thet Cleaner can be used on most manufacturers laser cutter, such as Mazak, Bystronic, Messer, Mitsubishi,
Trumpf, Amada or others. Available for both CO2 and fiber laser metal cutting machine. So, even in your workshop there
are different brands, different models laser cutting machines, that doesn't matter. In another words, you can regard it as
Trumpf laser Slat cleaner, Mazak Laser slat cleaner, Bystronic laser slat cleaner, Amada laser slat cleaner, Messer laser
slat cleaner and so on.
2.Q:What good changes will the Slat Cleaner bring compared with slag removal by hand or simple manual tool,
such as hammer?
A: In one word, much more convenient you will feel by using the Slat Cleaner.
(1). Operated by just one person within 1 hours VS many people with many hours; At least 90% workhours saved.
(2). Clean the slag thoroughly VS not tydy and may ruin & bend the grates; Extend the life of slats and save the raw
materials by times.
(3). No need to stop production when running on one flatbed laser cutter with pallet changer. Even you can clean any
area you select. No need to remove slats. A lot of workhours are saved.
(4).Quality of cut parts improves as there is reduced slag build-up that causes the laser to bounce back and mar the
bottom surface of the cut materia.
3.Q:How do you clean your laser slats on your laser cutting machine ?
A: What's the most common response to what you can clean your laser slats on your laser cutting machine? Especially
maybe you have different brands laser cutting machines in your factory, such as Trumpf, Amada, Bystronic, Mazak,
HAN*S and so on. Most people will say that they replace all the laser slats on their laser cutting machine.