UC120

Designed for SME and SOHO users;

Compact and lightweight;

Provides FXS, FXO, GSM/LTE and Φ3.5 audio interface;

Support up to 15 concurrent calls;

Features fast installation, easy deployment, and high reliability.

OpenVox UC120 Series IPPBX is a new generation Unified Communication terminal equipment that combines voice and data. It is compact and lightweight, and provides following voice interfaces: FXS, FXO, GSM/LTE and Φ3.5 audio interface. It is compatible with multiple service platforms and terminals and can seamlessly connect to VoIP networks, traditional telephone networks (PSTN) and mobile networks (PLMN), and provide diverse converged communications solutions.

On the one hand, the UC120 connects to traditional telephones, faxes and traditional analog PBXs via a standard voice interface; on the other hand, it uses the standard SIP protocol and is compatible with most IPPBX, soft switch and SIP-based network platforms. At the same time, the UC120 supports four GSM bands to meet the requirements of global mobile communication networks.

As one of the product features, the product combines a Φ3.5 audio port, which can be directly connected to a computer headset for voice calls.

In addition, it has high-speed data capabilities, allowing users to high-speed Internet access via the WAN (LAN1) / LAN (LAN2) interface.

UC120 can be used as a personal communication product, and can also be used as a centralized communication product for SME, providing high-speed Internet access, enterprise voice communication, and enterprise short message transmission and reception.

Performance

• Features

  Physical Specification

  • FXS 1
  • FXO: 1
  • GSM/LTE: 1
  • Network Interface: 2 10/100 Base-T RJ45

  Voice Feature

  • VoIP Protocols: SIP over UDP/TCP/TLS, SDP, RTP/SRTP PPTP VPN
  • Supported Codecs: G.711a/μ law, G.723.1, G.729A/B, GSM,G.726, G.722, SPEEX, ADPCM, iLBC
  • Silence Suppression
  • Comfort Noise Generator (CNG)
  • Voice Activity Detection (VAD)
  • Echo canceller(G.168), Maximum 128ms
  • Adaptive Dynamic Bu ering
  • Adjustable Gain Control
  • Automatic Gain Control
  • Call Proceeding Tone: Dial Tone, Ring-back Tone, Busy Tone
  • Support NAT Traversal
  • DTMF Mode: RFC2833/Signal/Inband

  Mobile Feature

  • GSM: 850/900/1800/1900MHz
  • LTE: LTE FDD: B1/B3/B5/B8LTE TDD: B38/B38/B40/B41
  • SIM/UIM: each channel supports 1 SIM/UIM
  • SIM Card Voltage:1.8V, 3.0V
  • Antenna:3.0dB, SMA interface

  Additional Service

  • Call Forwarding (Unconditional/No Reply/Busy/Not Reachable)
  • Call Waiting/Holding
  • Call Transfer
  • Intra-group Pickup
  • Hotline
  • Do Not Disturb (DND)
  • Tripartite Meeting

  FXS

  • Interface Type:RJ11
  • Caller ID Signaling: BELL, V23, V23_JP, DTMF
  • Hang Up Detection: Off-hook, On-hook, Busy Tone
  • Polarity Reverse
  • Hooking Detection

  FXO

  • Interface Type:RJ11
  • Caller ID Detection: FSK, DTMF
  • Reversed-Polarity Detection
  • Delayed Response O -hook
  • Busy Tone Detection
  • No Current Hang-up Detection

  Software Feature

  • Interface Type: RJ11
  • Ring Group
  • Routes Group
  • Calling/Called Number Transform
  • Time Condition
  • Based on Destination Routing
  • Based on Source Routing
  • Dial Plan
  • Failover Routing
  • FXO Impedance Matching
  • Customizable Mult-language IVR
  • Auto Attendant Function
  • Local CDR Storage

  Management & Maintenance

  • Simple and convenient configuration via Web GUI
  • CLI Management Config
  • Support configuration flies backup and upload
  • Support Chinese and English page
  • Firmware Update by HTTP/TFTP
  • Modify Password via Web & Telnet
  • CDR Query & Export
  • Syslog Query & Export
  • Ping and Tracer Test
  • Traffic Statistics: TCP, UDP, RTP
  • Network Capture/Network Quality Test
  • Automatic Time synchronization

*LTE is still in development;
*N: Not Supported;
*UC120-1S1O Series take Line1 as FXS port and Line2 as FXO port by default, and support hardware failover.

Contact us

Please feel free to contact us if you have any questions.