Note:
The price of this link is only for machine,not including the wax accessories.if you need additional purchases,please contact us,thank you.
Product description
Type
wax heater
Model
BUT008A
Power
100W
Voltage
110-120V 60Hz 220-240V 50Hz
Temperature
30-135°C(86-275°F)
Product Size
16.5x16.5x14.2cm
Unit Weight
620g
Material
Transparent ABS
Directions for use
1.Connect the power,the temperature will be set to 90℃(1 94"F)automatically. Press "+" or"-" to adjust the temperature from 30℃(86°F) to 135℃ (275"F). Then press” Start". When the button stop flashing, the machine start heating. 2. Solid Mode(for wax beans):Press"Solid", then "Start" .The Temperature will rise to 125℃(257*F) and keep it for 45 minutes, then fall to 90°C(1 94℉) and keep until you turn the machine off. 3.Canned Mode (for canned wax): Press "Canned", then' 'Start". The Temperature will rise to 135*C(275*F) and keep it for 60 minutes, then fall to 90℃(194*F) and keep until you turn the machine off. 4.Delay Time:Adjust the temperature,and then press "delay time" to delay start. Press”+”or"-" to adjust time (from 0.5 hour to 24 hours), then press "Start" .For example,if you want to start the machine an hour later. First set a proper temperature, than press "delay time" ,set timer to "1 .0" ,press "Start". The machine will start heating in an hour.
Pay More Attention
一Test it on a small patch of skin first to make sure your skin is not overly sensitive to the wax. 一Test the wax temperature on figure to avoid damage before applying . 一Do not use water or alcohol to clean up the residual wax over the skin after hair removal. 一Soothe an aloe lotion on your skin to calm irritation after waxing hair removal. 一Do not take a shower or exposure temporarily after hair removal.