Factory whole sale filter pp sediment filter 1/5/10/20/50 Micro water filter names

 Characteristic of filter pp:

1.5 micron pp filter is made of polypropylene microfiber melt-entangled, without any chemical adhesive, the fiber randomly self-bonds in space to form a three-dimensional microporous structure cloth surface, integrating deep filtration and precision filtration. ;

2. The outer layered inner gradient gradient pore depth filtering structure effectively removes suspended matter, particles, rust and other impurities in the flowing liquid;

3. The bridging phenomenon occurs in the pores of the melt-blown filter element, so that the particles smaller than the pore channel can also be intercepted, and the effective filtration precision is greater than or equal to 99%;

4. Small pressure difference, strong dirt holding capacity, high filtration effect and long service life;

5.5 micron pp filter has high cleanliness and no pollution to water quality;

6. Acid and alkali resistant chemicals, corrosion of several organic solvents

Application of filter pp:

RO reverse osmosis system, security filtering

Civil drinking water filtration

Industrial water, electroplating solution filtration

Chemical raw materials, organic solution filtration

Parameters of filter pp: 

Inner diameter: standard filter element 62mm, 110mm, non-standard filter core can be produced according to customer requirements

Outer diameter: 16mm, 20mm, 26mm, 28mm, 30mm, 34mm, 38mm, 55mm, 60mm, 73mm, 75mm, 90mm, 100mm, 110mm

Length: 9.75", 9.87", 10", 20", 30", 40", 50", 60"

Filter material: polypropylene (PP)

End cap: polypropylene

Center rod: polypropylene

Gasket/seal: silicone rubber, ethylene propylene rubber, nitrile rubber, fluoro rubber

Filter surface: PP meltblown, meltblown fine lines, meltblown grooving, meltblown embossing

Due to different apertures, the flow rate per 10" filter is between 3-10GPM

filter pp

filter pp