Factory sale reflective aluminum foil bubble heat insulation materials for Roof

Aluminum foil bubble & foam heat insulation is designed to be installed in the walls and roof to help keep your building cooler in the summer and warmer in the winter, it is a new environment-friendly heat insulation material, which consist Polyethylene air bubble layer and epe foam on the basis of aluminum foil, the reflective aluminum foil can reflect most of the radiant heat rays to keep the inner atmosphere cool in summer and warm in winter, the uncontinuous air bubble cell can slow down heat conduction and convection, this is why it works effectively in both hot and cold climates. It is widely used on Roof Wall and Floor for buildings. 

1. Maximum R value can reach 14.9, different heat flow direction has different R-Value

2. Double side pure aluminium foil can Reflective 97% of radiant heat, change the temperature by 3-8 celsius degree.

3. Uncontinuous air cell layer can slow down the heat conduction and convection, keep cool and dry in Summer, warm and dry in Winter

4. The heat insulation is not burn -self , and not support burn , Fire-resisting Rate: Class A

5. The heat insulation will not absort any water ,Be unaffected by the humidity and moister .

6. Can be e cut easily(knife) , be fixed conviently (paste, staple ), DIY by yourself

7. Lighter and thinner ,will not be the burden of the construction.

8. Non-toxic, recycled materials, resuable Material, Economic, healthy and environmental

Metal &Steel Building, Homes ,Roof Underlayments

Cathedral Ceiling ,Crawl Spaces, Hot water Heaters

Basement Walls, Floors Carpets, Garage Doors, Pole Barns

1. Heat insulation and light inflecting in construction and protection for both cold water and hot water pipe

2. Separation of refrigerator; warm keeping for center air conditioner, refrigerator and other home appliances

3. Heat insulation, sound absorption and noise reduction for car, train, refrigerator car and laboratory; moisture proof cushion for traveling

4. Packing for special products and cold storage

5. Can be made into different colors and antistatic according to customers' specific requirements to reach the standards of top grade decoration

The heat is an energy, transmits in three ways, conduction, convection and radiation. Through the high temperature to low temperature transfer, and ultimately achieve the dynamic balance of average temperature.

Conduction: Air is a poor conductor of heat conduction. The air layer is the best material of anti-heat conductive. Such as snow suits, blank ets, etc. are all the use of air layer

Convection: Occurs in the material, like liquid , gas. Therefore, coldings need to be installed on the high place, and heating need to be put on the ground (lower), Its principle is using of thermal convection  transmission,  to achieve uniform temperature as soon as possible

Radiation: The sun's radiation do not tansmit to the Earth through any substance.  Aluminum foil can reflect 97% of radiant heat (Emission Rate E = 0.03), Aluminum foil insulation material is the best ideal to the anti-heat radiant.

Our roof aluminum foil insulation can work both in cold and hot climites.

1.The reflective of the pure aluminum foil is 97% ,that means it can not only stop the radiant heat from the outside and also stop the warmer loss from the inside .

2.The middle layer can slow down the heat conduction and convention greatly .

this is why our material can work in both cold and hot climate , it can keep cooler in summer and keep warmer in winter.

1  Are you a factory or trading company?

We're professional factory located in Qingdao city, Shandong province with many years production experience, assured quality and competitive factory price.

2  What is your main products?

Our main products are foil bubble heat insulation, foil foam heat insulation, multi-layers insulation, foil woven   fabric radiant barrier, foil fiberglass cloth insulation for construction; PE coated MPET film and aluminum foil for facing and lamiation; swimming pool solar cover for swimming pool.

3  What should I to get the quotation?

Please kindly advise us your details of size, thickness, density and quantity to check the exact prices.

4  Can we get samples?

Yes, we would like to offer samples before your order. We promise the quality of mass production will be exactly the same as sample.

5 What is the lead time?

The production time depends on your quantity, usually 7-25 working days.

6 What is your payment terms?

Usually payment is finished by T/T transfer, 30% of total amount as deposit, 70% before shipment or against copy of B/L.