Factory price honeycomb coal briquette press charcoal dust brick making machine

 The honeycomb charcoal briquette machine produced by our factory can mix the pulverized carbon     powder and pulverized coal by adding binder and water, then add the material to the machine for stamping, forming, demoulding, and finally become columnar finished carbon rod and coal rod. . In the production process, the length and diameter of the carbon rod can be replaced according to the

requirements of the customer, and it can be used in a multi-purpose machine, which is convenient and practical.

product information:

The briquetting machine, also known as the honeycomb briquette machine, has been improved several times and was once mainly used for household fire, heating, and honeycomb-shaped cylindrical briquettes made of anthracite. In the past, people processed pulverized coal into spheres slightly larger than table tennis. Later, people processed pulverized coal into cylinders and put some holes in the cylinders, because this can increase the surface area of coal, enable coal to burn fully, and reduce resources waste.

The structure and principle of the honeycomb machine

The honeycomb coal machine has a simple structure and is divided into five parts: a body, a rotation, a feeding, a stamping and a conveying. The parts work together and the operation is coordinated and stable.
1. The body part: consists of a platen and a machine base, which are opened into the skeleton of the machine.
2. Transmission part: It consists of motor, pulley, gear, drive shaft and other components. The motor rotates the gear shaft through the pulley and transmits it to the transmission shaft through two gears. The pair of bevel gears and the rotating shaft drive the dial, and the dial is turned to move to the four-hole disc.
3. Feeding part: It consists of a rotating shaft, a hopper and a stirrer. It is driven by an axial gear to stir the coal and mix it into the mold.
4. The stamping part mainly consists of four sliding rods, sliding beam, punching rod, punching seat, punching head, movable pressing plate, movable mold bottom and spring. When the machine rotates, the two gears rotate through the pull rod to drive the sliding beam. When the punch goes down, the punch is forced to move down, the movable plate moves up and the spring is tightened, the coal is pressed and the coal is punched, and the formed coal is loose, by the spring. Press the active platen to determine the compression of the coal.
5. The conveying part is composed of a conveyor frame, a pulley, a bracket and a conveyor belt. The conveyor belt is randomly rotated to send the shaped coal out of the body, and the adjustable screw on the conveyor can adjust the tightness of the conveyor belt.

Coal crusher machine 

The pulverization of coal into powder, used in the production of coal products of some small factories

Charcoal dust double-shaft mixer

Mix together the charcoal  powder and adhesive,and better mixing effect

Coal dust wheel mixer

Coal dust wheel mixer mainly used for crushing coal particles and mixing coal powder and other additives

Conveyor

Conveyor belt is used to transport raw materials and finished products in the production line and connect other machines