Factory price high temperature heat dissipation online tuning fork density meter/density meter
The Plug-in (Direct Insertion) Densimeter can detect density on line in real time. It can be applied to process control of products with density as basic parameter or quality control with solid percentage or concentration percentage as reference. Typical industries include petrochemical industry, brewing industry, food industry, pharmaceutical industry and mineral processing (such as clay, carbonate, silicate, etc.), which are specifically applied to interface detection in multi-product pipelines in the above industries, density detection of stirred mixture, end-point monitoring of reaction kettle, and segregation device interface detection.
Product name | Direct Insertion Fork densitometer |
Measurement range | 0.5-2.5 g /cc (500-2500 kg/m3) |
Function | Test Density |
Temperature range | -50 c ~+150 c |
Measure Range | 0-2500kg/m3 |
Accuracy | ±2kg/m3 |
Max Working Pressure | 207bar (3000psi) |
Medium Viscosity | 0-20000cp |
Power Supply | 24 V DC |
Signal Output | 4-20mA /RS485/0-1000HZ |
IP Grade | IP67 |
Wetted Material | SS316/SS2205/Hastelloy C/ PTFE |
Process Connecting | Flange |
Installation Pipe Request | Min DN100,full flow pipe , flow speed less than 5m/s |
Scope of application: The plug-in density meter can perform real-time online density detection. It can be used for process control of products with density as the basic parameter or quality control with solid percentage or concentration percentage as a reference. Typical industries include petrochemical industry, wine industry, food industry, pharmaceutical industry and mineral processing (such as clay, carbonate, silicate, etc.), which are specifically used in the interface detection and mixing of multi-product pipelines in the above industries The density detection, the end-point monitoring of the reactor, the interface detection of the separator. The sensor works based on the principle of component vibration, and the component part is the tuning fork part immersed in the measured liquid. The tuning fork part induces vibration through an internal piezoelectric device fixed at the bottom end of the fork body. The oscillation frequency is detected by a secondary piezoelectric device fixed at the other end of the fork body, and then the signal is amplified by the circuit on the top. The density of the liquid is closely related to the vibration frequency when the measured liquid flows. When the density of the measured liquid changes, the vibration frequency when the liquid flows also changes. Through the following equation, the density of the measured liquid can be accurately calculated.
Semi-finished circuit board components
Workers working in the production workshop and production operations
Workers working in the production workshop and production operations
The product will be shipped from the warehouse after aging is confirmed
WE PROMISE :
100% Original Direct Factory
100% Independent R&D
100% Production By Ourselves
100% Heart Service
We Can , So We Promise Here !
Welcome Your Inquiry !