Factory price Laser cutting fume extractor/welding smoke exhauster/portable dust cleaner/welding smoke filtration unit
Smoke Layer,Dust, Welding Fumes And A Bad Atmosphere in your Workshop? Or work stations are frequently changing? The below Loobo portable fume extractors help you to solve this. Contact me for more details.
(ATTN:Molly Huang, via mail :lb044007at loobo.cn, TEL: 86-15064847869)
Use for purification of the smoke and dust during the welding, polishing, cutting, grinding process and the recycling of rare metals and precious material, can purify large amounts of suspended small metallic particles in the air.
* Operating Principle:
It is equipped with three layer filter system
1, under the help of the fan device, the welding fume is sucked into inlet through sucking hood. There is the flame arrester in the inlet, so the spark can be blocked here, the left fume and dust is sucked into gravity separator, and then the bigger particles firstly descend into dust bag.
2, the smaller particles are arrested in the surface of core filter. The cleaner gas then flow into clean room after being purified by core filters.
3, in clean room, the clean gas is then further purified by active carbon. At last, the gas meets the required standards and enters into air or other required room.
**The basic Stage Filtration Process about the welding fume extractor
Stage 1: Air passes trhough the pre-filter fire-proof net.
Stage 2: Air passes through a second pre-separator to further reduce medium to heavy particulate matter.
Stage 3: Air passes through the LongLife-H filter where welding fume particles are captured and deposited.
Stage 4: Activated carbon filter will help prevent or neutralize the release of odors back into the environment.
***Facility Characteristics
1) It is equipped with special turbo fan and motor, both the air pressure and air volume can reach the standard, and to ensure that the welding fume purification a good performance.
2) Advanced design of air suction hood and dust collector function in one body, to prevent the diffusion of welding smoke pollution from the source.
3) The circuit of the machine is adopted overload protection circuit, which prevent equipment and circuit burn, so the machine has a high security and stable performance.
4) The hose of the flexible extraction arm is high quality PVC steel wire hose, it can resist the 140°C, with corrosion resistance and light weight .
5) The built in support structure is a set of self balance type linkage mechanism with characteristics of a full range of hovering, pull the handle on the hood, easily stretch the arm to reach any position within the arm length (we can custom made the arms length according to user needs, the max is 5m long), and hover in the ideal position of soot absorption without any auxiliary supporting facilities.
6)The flexible extraction arm can be applied for the complicated condition that have no way to install the ducting.
7) Filter is an important part of the fume extractor machine, it is the heart of the dust removal equipment, its performance and quality is the key to the service life of the equipment and the performance of fume extraction. We use the imported PTFE polyester fiber material for the main cartridge filter. The material has very low friction coefficient, good wear resistance and excellent chemical stability, high accuracy, according to the condition of fine up to 0.2 microns. The material surface is smooth, not easy to adhere, it is more easy for the pulse jet cleaning system. The cartridge filter service life is long, around 1-2 years under normal operating conditions.
8) Cleaning way: manual cleaning, and automatic cleaning system.
For the auto cleaning type, we use the pulse jet cleaning way, that is, one by one cartridge automatic cleaning orderly, pulse valve open a time, then generates a pulse action, the injection pulse intensity and frequency can be adjusted, and the cleaning and filtration can be run at the same time, so to make sure the machine works well and promote the production efficiency.
9) the inside of the fume extractor machine is adopted with three layer protective measures for fire hazard and large molten slag particles, to make the purifier for a longer service life, and more safe and reliable.
10) The Fume Extractor is equipped with industrial casters: the active casters and stationary casters, to make sure a free movement and positioning. The caster is of surface super polyurethane materials, to make the equipment has a high impact resistance and strength.
11) The reasonable collocation of the grid air outlet and the high quality sound insulation material can reduce the noise of the welding fume purifier effectively.
12) The consumptive material of the fume extractor has a stable performance, and convenient and quick to change.
LB-JZX Series Welding Fume Purifier Parameters Table, Double cartridge filter,Auto cleaning type (http://loobo.cn/video/gyhb/606.htm) :
Technical Parameter:
Model |
Airflow (m3/h) |
Power (kw) |
Voltage (v/hz) |
Size(mm) | Noise(dB(A)) |
LB-JZX2400 | 2400 | 2.2 | 380/50HZ | 900*800*1480 | 75 |
LB-JZX3600 | 3600 | 3.0 | 380/50HZ | 900*800*1480 |
78 |
LB-JZX4800 | 4800 | 4.0 | 380/50HZ | 900*800*1480 | 78 |
LB-JZX2400S | 2400 | 2.2 | 380/50HZ | 900*800*1480 | 75 |
LB-JZX3600S | 3600 | 3.0 | 380/50HZ | 900*800*1480 | 78 |
LB-JZX4800S | 4800 | 4.0 | 380/50HZ | 900*800*1480 | 78 |
Custom design and production is available.
Other Similar products:
Work video: http://loobo.cn/video/gyhb/600.htm
LB-JZ Series Welding Fume Purifier Parameters Table, Maunal cleaning type:
Model |
Airflow (M3/h) |
Voltage (V) |
Power (kw) |
Size L xWxH (mm) |
Noise (dB) |
LB-JZ 1500 |
1500 |
380 |
1.5 |
650x550x1250 |
≤60 |
LB-JZ 2400 |
2400 |
380 |
2.2 |
650x550x1250 |
≤68 |
LB-JZ 3600 |
3600 |
380 |
3.0 |
650x550x1250 |
≤68 |
LB-JZ2400S |
2400 |
380 |
2.2 |
650x550x1250 |
≤69 |
LB-JZ3600S |
3600 |
380 |
3.0 |
650x550x1250 |
≤72 |
LB-JZD Series Welding Fume Purifier Parameters Table, Auto cleaning type:
The " D " in models for the welding fume extractors represent Pulsing back-flushing automatic dust-removal system. " S " respresents the welding fume extractor has the double arms for two working stations.
The JZ(D) is basically same to the JZ. The main difference is when you connect air compressor to back-flush for cleaning cartridge, the back-flushing of JZ(D) can be auto-controlled by pulse valve; while the back-flushing of JZ is manual type. Compare with JZ series, JZ(D) is suitable for the heavy smoke workshop
Model |
Airflow (M3/h) |
Voltage (V) |
Power (kw) |
Size L xWxH (mm) |
Noise (dB) |
LB-JZ 1500(D) |
1500 |
380 |
1.5 |
650x670x1250 |
≤72 |
LB-JZ 2400(D) |
2400 |
380 |
2.2 |
650x670x1250 |
≤72 |
LB-JZ 3600(D) |
3600 |
380 |
3.0 |
650x670x1250 |
≤75 |
LB-JZ2400S(D) |
2400 |
380 |
2.2 |
650x670x1250 |
≤75 |
LB-JZ3600S(D) |
3600 |
380 |
3.0 |
650x670x1250 |
≤75 |
LB-JC Smart welding smoke purifier
Model |
Airflow M³/h |
Power KW |
Voltage V/Hz |
Ash removal model |
compressed air (mpa) |
Dimension (mm) |
Noise (dbA) |
JC1500 |
1500 |
1.5 |
380/50 |
automatic blow |
0.5-0.6 |
700*760*1460 |
<72 |
JC2400 |
2400 |
2.2 |
380/50 |
0.5-0.6 |
700*760*1460 |
<75 |
JW Carbon air filter for welding
JK Cartridge type fume extractor
LB-JX Electrostatic welding fume extractor
Package:Plywood Box
Price Term: Ex-works,FOB,C&F by sea
Lead time:1 week for standard products and 2-3 weeks for special customized.
Qingdao Loobo Environmental Protection Technology Co.,Ltd is one of the biggest enviromental protection products manufacturer, located in Qingdao city of china,specialized in alll kinds of portable fume extractor, downdraft benches(grinding dust removal worktable), central fume purification system, flexible suction arm,etc.
We have more than ten years export experience ,all of our products with the ISO9001 and CE certification, the quality can be guaranteed.
We have our own R&D department , have a variety of style range to meet any of your requirments and had established the economies of scale, so can dilivery fast and provide can beat your competitor's price.
Best Regards
Miss Molly Huang