There is a kind of laser tube
High power rate, fast - speed cutting and small size
Quality standard: International
8 hours working every day,it goes for 3years
It's kerf received a full of customer praise and won reputation
How much do you ecaluate it?
Item specifics
Working Principle: high-pressure discharge stimulate high concentration CO2 to generate laser.
Laser Wave Length: 10.6um
Laser Mode:low order mode
Water-Cooling:purified water, appropriate temperature 10-35℃.
Working Environment:temperature 5-35℃, humidity 10-60%, clean environment, no serious pollution.
Working Current:26~30mA is appropriate (excessive current will affect laser power and laser tube lifetime.
Safety Demand:CO2 laser tube outputs invisible light, positive with high pressure, if necessary, eyewear is essential.
Laser State: Laser power will be attenuated when the laser tube is used at a certain time; If the laser is pink, it is in normal condition; if the laser is white, it means the laser power is attenuate. ( Laser tube is consumable, please change a new one when it can't meet demand due to attenuation. )
Product profile : CO2 Laser Tube
1.Installation Requirement
Make sure to follow the operation instruction of model S2 as shown in the illustration. The dedicated power should be equipped. The positive pole of laser tube is in high voltage (the ignition voltage is 19kv).
It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube
will be punctured by electricity and may cause water leakage.
2.Operation conditions
Water flow: pure water: 2 to 5 liter/minute
water temperature: 10℃-40℃.
Operating environment: 2-40℃; humidity 10-60%.
The working current: test current is 29mA. Maximum working current is 29mA.
The ammeter must be connected to the negative electrode of laser tube.When it is working under over-high current for long term, the negative pole will appear light yellow and the life span will be shortened rapidly.
To protect dust from going into the insulation sheath, please wrap it with plastic film.
3.Working Performance
Engraving function: Very good. When the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving.
4.Key Notes
Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise
the output power will be seriously affected. The followings are the designated methods to
clean up pollution in the exterior surface of window mirror:
1) When the mirror is polluted, do not turn on the laser.
2) Blow the mirror surface sideways with an air blower.
3) Spray the pure alcohol on the mirror surface with sprayer.
4) Turn on the laser after the alcohol gets fully volatilized.
5) If the methods above don't work effectively, it is necessary to ask for the professional
to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution
is to prevent the window from being polluted.
Attention: it is forbidden to clean the mirror with acetone.
The screws in the front and back ends of the laser tube are not allowed to be moved,
otherwise the output power will be declined, even the tube will be scrapped.
Put the acryl 300mm far away from output mirror, when testing its laser spot.
5.Safety
The laser beam is invisible light. Please wear protective glasses when debugging the laser.
The positive pole is in high voltage. Pay attention to the security marks.
6.Storage and Transportation Requirement
Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust-proof plastic bag. The storage environment is 2-40℃, and the requested humidity is 10-60%. Pack the laser as in the original way.
Important notes: it is requested to use adhesive tape to cement the sponge together with laser tube
to prevent the tube from vertically sliding during transportation. The sponge in the side of output mirror
must be 70 mm beyond it, and the sponge in the side of reflecting mirror must be 50 mm wider.
2018 NEWEST GSI ORIGINAL TECHNOLOGY ,With more than 40years of history
On the 20th October 2015, SPI Lasers UK Ltd., a subsidiary of the Trumpf Group, has sold its CO₂ laser business to Suzhou Tianhong Laser Co. Ltd.(JK™ Lasers of GSI CO2 business).SPI Lasers acquired the established CO₂ laser business previously operated by JK™ Lasers from GSI Group in April.SPI lasers also acquired tianhong laser established CO₂ business.
Suzhou eCO2 laser company funded by Tianhong laser in the end of 2017,Which retained the original technology team and continued to sell and develop its suite of industrial CO₂ lasers.
Economy Type HLC Series Advantages
Positive High Voltage Structure , GSI UK original technology foe Catalytic , GSI original inflation formula for co2 gas , PERFECT LASER SPOT , High vacuum technology for longlife time , Excellent beam profile at all power levels , High Stability output , 12Months lifetime
CO2 Laser Tube
Applicable Materia
Acrylic, Crytal, Glass, Leather, MDF, Metal, Paper, plastic, Plexiglax, Plywood, Rubber, Stone, Wood and other non-materials.
Warranty One Year
Origin UK&China
ultra Working Time ≥10000 hours
Output Power 100W,130W,150W
Shipping ways DHL, FEDEX,TNT Air Express Shipping/Ocean
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
A: Low MOQ, 1pc for sample checking is available
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 7 days to arrive. Airline and sea shipping also optional.
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
A: Yes, we offer 1-2 years warranty to our products.
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, Our company has an excellent-sales service system.