Factory direct sales of industrial building steel grating welding machine

The equipment is specially designed and researched on the basis of enhancing steel bar truss girder welding machine stability, reducing the energy consumption and noise, reducing size. It is applied in the construction machinery industry.
 

Components of the machine:

1. 5 coil wire feeding racks

2. wire feeding and straightening system

3.main bending. welding and cutting frame

4.girder loading holder

Features:

- Hydraulic system is used to match the production

-5 clampper s used to holed five wires at same time

- adjustable structure is used to adjust final product size

-special stragighten mechanism is used to reduce the noise, energy lost and structrue change. Special rollers applied to reduce the friction during the feeding process

-Hydraulic system used to replace five straighten electric motors, one servo motor and one air compressor, to reduce the energy consumption and noise and more stable during the production.

Main Parameters:

Power supply:Three phase AC380V, +10%~-10%
Duty cycle: 15%
Rated Power Input: 3x250KVA
Secondary no-load voltage: 11.5V
Max. Short Current: 40KA
Air pressure: 0.5-0.8MPa;
Coolant pressure: 0.3MPa
Coolant flow: 60L/Min
Coolant temperature: 0≤30°C
Max Welding speed: 15M/min
Truss height: 70-350mm
Truss section spacing: 190-210(Adjustable)mm
Wire diameter of power cable(copper cable) : ≥120mm2
Wire diameter of grounding cable(copper cable): ≥60mm2
Air switch capacity: 1250A;
Water inlet and outlet diameter: G1½
Air Inlet diameter: φ14mm
Welding machine main part weight: 8000kg