Quality stainless steel 304/316
Contact parts of machine are completely made of food grade stainless steel 304/316L, meeting the standard of GMP.
* Description: | Designed according to ISO9001/GMP standard, widely used for mixing liquid medium in the food-processing, cosmetics and pharmaceutical industries |
* Material: | 1) Tank body: SS304/SS316L 2) Jacket: dimple jacket/ miller board, hollow jacket or coil pipe jacket etc. 3) Insulation layer: PU Foam |
* Capacity: | 50L, 100L, 200L, 300L, 500L, 600L, 1000L~ 5000L etc. |
* Voltage: | 110-480V, 50/60Hz |
* Motor: | Siemes, Ex-proof , ABB, LOCAL avaible |
* Surface treatment: | Inner polished and outside polished (Inside Ra<0.6 micron,surface mirror polish Ra<0.9 micron) |
* Available inlet and outlet port connection: | Clamp, Thread Butt weld, Flange |
* Optional Configuration: | 1.manhole 2.CIP spraying ball 3.adjusting feet 4.sample valve 5.temperature gauge 6.pressure gauge 7.level gauge |
* Agitator: | With agitator or not 1) Agitator type avaible: Frame, paddle, scraper, homogenizer, turbo type etc. 2) Agitator Speed avaible: 20-36rpm, 50-300rpm, 760-1450rpm, 2800-3000rpm 3) Agitator power avaible: 0.55kw, 1.1kw, 1.5kw, 2.2kw, 3kw, ...7.5KW(be effected by the mixing product features) |
Applicable range:
1. Used as blending tank, mixing tank, preparation tank, fermentation tank, disinfection tank and ageing tank etc.
2. Ideal in fields such as food, dairy products, fruit juice beverages, pharmacy, chemical industry and biological engineering etc.
* Heating method:
1) By electricity (oils or water): Insert the electric heating rods into jacket, and uniform heating and no cooling zone. Pour heat conducting oil or water into jacket as heating medium, they produce heat energy to heat the material in the tank.
2) by steam: pour steam into jacket, through its heat energy to heat the material in the tank
optional parts: steam control valves(electromagnetic valve, steam stop valve, safety valve and pressure gauge, steam trap valve)
3) by gas: direct heating the material in the tank, or with conducting oil or water jacket with isolation
Volume (L) | Dimension D*h (mm*mm) | Height (mm) | In/Outlet diameter (mm) | Heat preservation layer |
1000 | 1060*1220 | 2550 | 51 | 60 |
1500 | 1160*1500 | 2850 | 51 | 60 |
2000 | 1340*1500 | 2900 | 51 | 60 |
3000 | 1410*2000 | 3400 | 51 | 60 |
4000 | 1620*2000 | 3450 | 51 | 60 |
5000 | 1810*2000 | 3500 | 51 | 60 |
6000 | 1930*2000 | 3550 | 51 | 60 |
7000 | 1930*2440 | 4000 | 51 | 60 |
8000 | 2060*2440 | 4000 | 51 | 60 |
9000 | 2180*2440 | 4050 | 51 | 60 |
10000 | 2300*2440 | 4050 | 51 | 60 |
12000 | 2270*3000 | 4600 | 51 | 60 |
15000 | 2530*3000 | 4700 | 51 | 60 |
Quality stainless steel 304/316
Contact parts of machine are completely made of food grade stainless steel 304/316L, meeting the standard of GMP.
Motor device
1. Pure copper motor: low noise, stable dynamic, sustainable work.
2. Dust proof engine base: inside stainless steel bearing, with dust cover to avoid dust and grease dirt into tank.
Double open lids with Handle
Creative handle, quick to open, convenient for production
SS agitator:
1. Rotation speed can be constant speed, also can be equipped with VFD according to real work condition.
2. Agitator can be homgenizer frame mixer, paddle, scattered disk, scraper, ribbon etc.
Electric control box:
1. intelligent temperature controller, SS304 box
2. PT100 thermal resistance
3. Germany Schneider Electric Components
Electrical heated tube(electric heating rods):
1. adopt threaded connection form, convenient assembly.
2. pad adopt Import material, Resistant to 300 degrees temperature, difficult to leak.
Temperature control:
Using thermocouple to measure the temperature and connected with temperature controller to control the temperature, and also can adjust the temperature of material in tank .
show the inside tank feeding material temperature
a modern enterprise which combine the ability of design, development, manufacturing, engineering, installation, technical services, has special technology to design and exploit by CAD software and computer and is a outstanding leader among valve fields.
We have advanced CNC lathes imported from Japan.We can manufacture the valves and fitting according to ISO, DIN, IDF, SMS, 3A, while we can produce the products per as the requirement from the clients(non-standard).
We are specialized in producing different kinds of valves, pipe fitting, tubes, manhole covers, pumps, tanks etc for many years. We can design the products according to your special request. OEM is welcome too.
Please contact our After-sales service department in time within 30days after you received the cargo. | ||
Tel: 86-577-86821328 Time: 9:00 a.m.- 6:00 p.m. (Beijing time) | ||
Process | Please provide the copy of Sales Contract and describe the problems appeared. | |
Problems confrimation: | ||
Slight problem: | Please send the proof to our After-Sales Department, we will reply within two days. | |
Serious problem: | ||
a | We will dispatch our Quality and Problems Appraisers to make a confirmation. | |
b | Have a negotiation of the compensation and sign agreements | |
c | Our After-Sales Department will perform the duties as the agreements |