Factory direct sale Brand new SINOTUCK Howo 6x4 336 hp 371hp 375hp 30tons Dump tipper Truck
Howo 10 wheeler dump truck is equipped with an automatic dumping device in the carriage. Howo 10 wheeler dump truck is composed of automobile chassis, hydraulic lifting mechanism, power take-off device and cargo compartment. In civil engineering, Howo 10 wheeler dump truck is often combined with excavators, loaders, belt conveyors, etc. to form a loading, transporting, and unloading production line for the loading, unloading and transportation of earthwork, sand, and loose materials. Because the loading carriage can automatically tilt to discharge at a certain angle, Howo 10 wheeler dump truck greatly saves the unloading time and labor, shortens the transportation cycle, improves production efficiency, reduces transportation costs, and indicates the loading volume.
Howo 25 ton dump truck is a commonly used transportation machine. The structure of the engine, chassis and cab is the same as that of general trucks. The carriage can be tilted backwards or sideways. The piston rod movement is controlled by the control system. Later tilting is more common. Push the piston rod to tilt the cabin.
Model | ZZ3257N3447A1 GCW40000kgs Driving Type 6×4 | |
Engine | Engine model | WD615.69, Euro II emission standard, 4 stroke injection diesel engine, 6 cylinder in-line with water cooling, turbo-charging & inter cooling, mechanical high pressure oil pump system |
Maximum output | 336PS (247kW) at 2200 rpm | |
Maximum torque | 1350Nm at 1100-1600rpm | |
Bore | 126mm Stroke: 130mm | |
Displacement | 9.726L | |
Compression ratio | 17.5:1 | |
Specific fuel consumption | ≤198g/kWh | |
Engine oil filling quantity | 23L | |
Air compressors | WABCO Twin cylinders air compressors; | |
Cooling system filling quantity (long-term filling) |
40L | |
Clutch | SINOTRUK’s 430C diaphragm spring clutch, hydraulically operating with air assistance | |
Transmission | Transmission, model HW19710, 10 forward and 2 reverse Ratio:14.28; 10.62; 7.87; 5.88; 4.38; 3.27; 2.43; 1.80; 1.34; 1.00; 13.91/3.18(R) |
|
Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | |
Front Axle | New HF9 series, with drum brake system Steering with double T-cross section beam |
|
Rear Axle | HC16 pressed axle housing, single reduction and differential locks between axles; with drum brake system. Ratio: 5.73 |
|
Chassis | Frame: | High-strength U-profile frame, all cold riveted cross members and reinforced subframe |
Front suspension: | semi-elliptic leaf springs with hydraulic telescopic double-action shock absorbers and stabilizer | |
Rear suspension: | semi-elliptic leaf springs and bogie springs | |
Spare wheel carrier: | with one spare wheel | |
Steering |
ZF8098, hydraulic steering with power assistance Ratio: 22.2-26.2:1 |
|
Braking System | Front and rear drum brake, four-circuit protection valve | |
Service brake | dual circuit compressed air brake | |
Parking Brake | spring energy, compressed air operating on rear wheels | |
Auxiliary brake | engine exhaust brake | |
Wheel & Types | Rims | 8.5-20,10 hole-steel |
Types | 12.00R20, 12.00R22.5, 315/80R22.5, 12.00-20 |
Our company promise a one-year warranty period, during this period, under normal use if there is damage to the accessories, we will provide our customers with free new accessories.
Shandong ZF TruckTrailer Manufacture Co., Ltd is appointed Special Vehicle Manufacturer approved by NDRC (National Development and Reform Commission) whose products are into 'Announcement' management of national vehicles.The company is science, industry, and commerce integrated enterprise which combines products design, research development, production and marketing, owning Low bed semi trailer,Container semi trailer, Oil/fuel tank trailer,Side wall semi trailer, Cargo semi trailer, Box semi trailer,Dump truck trailer,Module trailer,LPG trailer and so on,more than 100 variety products,welcome to contact us.
Shipping method: Ro-Ro, Bulk cargo, Container These three modes of transportation, we can provide customers with the most economical semi-trailer transportation plan according to the number of semi-trailers required by customers.
We sincerely invite customers to come to our factory and check products, we will also be with customers to taste the local food, visit the local attractions, our aim is to give customers a best truck trailer programs and a comfortable travel.
1. Q: Do you have your own factory?
A: We have our own factory and we have 10 years experience in semi trailer production.We sincerely welcome you to visit our factory.
2. Q: Where is your factory located?
A: Our factory is located in Industry Park, Liangshan Town, Jining City, Shandong province,China.
3. Q: How long it will take for an order to be delivered?
A: 15 to 20 working days after we received your 30% prepayment or 100% L/C. The specific delivery time depends on the items and the quantity of your order.
4. Q: Can I get a sample or order 1 unit?
A: Yes, you can order 1 unit and our MOQ is 1 set.
5. Q: How about the warranty?
A: Our company promise a one-year warranty period, during this period, under normal use if there is damage to the accessories, we will provide our customers with free new accessories.
6. Q: How about the after sales service?
A: We provide technical support and spare parts for long life time of our products.
7. Q:If Customized Service Provided ?
A:Yes, Please Contact Our Sales Manger, We Can Offer Customized Service On Vehicle Design / Painting/Logo, Etc.
8. Whats The Time For Delivery ?
A: If standard model we have in stock can ship it out within 10 days after payment.
If uesd trailer or truck,we can ship it out within 10 days after payment. Because we have to renovate and paint it.
If it is a new production,ordinary cases in 20 days can be finished for shipment.
9. What's your payment terms?
T/T: 30% deposit by T/T,70% balance should be paid before shipment.
L/C: 100% irrevocable Credit of Letter.
Contact info:
Name: Laura Liu
WhatsApp: +86 18963064291