Factory Supply heat vulcanizing cable vulcanisation autoclave
Factory Supply heat vulcanizing cable vulcanisation autoclave
Technical Parameters:
| Desientemperture (℃) | 180℃ |
| Desiin pressure (Mpa) | 0.85Mpa |
| Inside diameter | 2000mm |
| Effective length | 10500mm |
| Total cubic neter | 10.59CUBIC METER |
| Material | Q345R(pressure vessel special material) |
| thickness | 10mm |
| Heat ways | Hot air heatine circulation fan 22kw,heater:168kw |
| Open door ways | Manual quickly open door |
| Sealine ways | Fillire air sealine (lifetime1-2year) |
| Control ways | Intelligent control (divide into eieht state to raise tepperature, once you start, let it work by itself) |
| Safetyways | tank door double safety interlock ,tank with three safety interlock |
| Alarm ways | over pressure automatic alarm ,automatic discharge pressure |
| Tepperature uniform | ±l-2℃ |
| Pressure difference | <±0.01mpa |
| Rail symbols .bearing | GB9 |
Temperature ,pressure, time, adopt the automatic control ,stable and reliable performance ,convenient use ,is a traditional vulcanizing tank equipment.0.6-3.0Mpa design pressure, design temperature150-220℃ according to the product technical requirements for individual design customized for clients .Steam tank bottom enters, imported by the automatic control valve at the tank bottom setting steam ,the steam vertical diffusion tube arranged in the tank bottom ,small and medium-sized mouth diffusion tube (3mm,4mm,5mm)arranged according to certain rules and Angle offset, to ensure that the steam into the tank after the temperature even spreading around ,prevent the uneven steam diffusion caused by the different product quality. Affer setting process ,automatic control system for heating ,heat preservation, sulfide, vulcanization after send out sound light alarm and automatically stop working.
Why to choose our rubber autoclave for curing?
1.Our ram material is national goverment pointed facmous steel factory ,and standard pressure vessel special plate ,Q345R .Each steel is tested before leaving factory .It have good bear pressure
2.heating area is uniform ,according to your working technology to design inside heating system ,we have special design heating sink ,,it is arranged in the up side ,bottom ,left side ,right side ,
3.Adopt external insulation ,the galvanized sheet is welded around the tank (it wont rust within 10 years),inside are 80mm insulation cottom ,heat insulation head add 60mm thermal insulation , then add fixed bolt .To make inside heating value can be used enough ,and reduce consumtion , save cost . and it is easy for transportation.
1.What is the max size can you do?
The max diameter which we can produce is 4.5m.
The length is up to the clients’ requirement.
2.How many wood can you treat for one circle ?
It is up to your choose diameter and length
3.How long to finish one circle ?
Generally is 2-3 days. is up to wood’s thickness.
4.Is it manual or automatic operation ?
This machine is full automatic type.
5.Can we install the equipment by ourselves?
Of course ,we have full set drawing which will send to you after order
6. lf your engineer is aviliable to oversea to install
Yes ,if you need ,we can arrange the engineer to install for you.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier