Scope
The polyimide film is produced by adopting “Doctor-blading process”. It possesses hot-resistant, radiation resistant and excellent dielectric performance and applies to motor Grade H. electrical insulation as well as the electric engineering insulating materials for other usage.
Specifications
Appearance: Smooth and bright film surface. The defects of folding, broken, particulate air bubble, pinpoint and foreign impurities, tidy edges and non damage the film provided in rolling.
Dimension
1) Thickness and deviation of allowing:
Note: supply 125-225μm according to user’s enquiry too, allow both sides of supply and demand of the deviation to consult.
2) Width: not less than 250mm, deviation of ±1.6mm. According to the customer’s requirements, the different size of type can be made.
3)Length: supplied according to the customer’s requirements.
Polyimide film is a good H grade insulating material. It is widely used for insulation purpose in electrical appliances which are used in special environment. To use the polyimide film means reducing volume and weight of the electrical appliances while retaining the same output or increase the capacity without increasing in frame size.
The following properties of Polyimide Film ensure its good performance under extreme temperature or other conditions:
1.Good property of insulation and mechanism.
2.Good temperature-resistant property, wide performance temperature range. It can be used under temperature from –60 °C to +250 °C for a long period and –269 °C to +400 °C for a short period without changing its electrical and mechanic properties.
3.Good chemical stability. It resists most organic solvents.
4.Excellent flame retardant property
5.Good radian-resistant property
6.Can be combined with many other materials. When combined with fluorine resin, its characters of wet and corrosion resistance are greatly improved.
Applications
Flexible Printed Circuits;Insulation;Automotive;Bar Code Labels;Aerospace;Safety;Transportation
Kapton PI-H
TYPE | Kapton TYPE | THICKNESS | WIDTH | LENGTH |
PI-H013 |
| 12.5 - 0.5 | 10~1000 | 1000~3000 |
PI-H020 |
| 20 - 0.8 | 10-480/950 | 1000 |
PI-H025 | HN100 | 25 - 1 | 10-500/1000 | 1000 |
PI-H030 |
| 30 - 1.2 | 10-500/1000 | 1000 |
PI-H040 |
| 40 - 1.6 | 10-500/1000 | 1000 |
PI-H050 | HN200 | 50 - 2 | 10-500/1000 | 1000 |
PI-H075 | HN300 | 75 - 3 | 10-500/1000 | 500 |
PI-H100 |
| 100 - 4 | 10-520 | 500 |
PI-H125 | HN500 | 125 - 5 | 10-500 | 300 |
PI-H150 |
| 150 - 6 | 10-500 | 200 |
PI-H175 |
| 175 - 7 | 10-500 | 200 |
Our Factory Competitive Advantages
*Well Competitive Prices and High Quality Control
*Prompt Delivery
*Customer's Design and Logo are Welcome
*Earth-friendly Products
*In a Variety of Design
*Small Order Acceptable
*OEM Accepted
About Factory
Jiangsu Yabao Insulation Material Co., Ltd. was established in 1986, specializing in producing insulation materials:
Polyimide film series: | Polyimide Film 6051 Corona-resistant Polyimide Film (CR Film) Polyimide Film with F46 (FEP) Tape |
Adhesive tape series | Polyimide Film with Acrylic Adhesive Tape Polyimide Film with Silicone Adhesive Tape |
Composite material series | Composite material (NHN, NMN) Mica insulation material (mica tape, mica foil and mica board) |
Package and Supply
The film is packed in rolls.
Thickness | 25 micron | 50 micron | 75 micron | 100 micron | 125 micron |
Length* | 2000 m (max) | 750 m | 500 m | 330 m | 300 m |
* Special Length available upon request
Width | Core Type | Core Size |
7-20mm | Plastic | 3 inch (76 mm) |
20-1000mm | Paper | 3 inch (76 mm) |