Basic Parameters | Rated Current | 16A |
Input And Output | 220V AC-10%,50Hz | |
Withstand Voltage Level | 2000V AC 1min,Leakage current<5mA | |
Insulation Resistance | >=10MΩ | |
Degree of Protection | IP66 Charging gun, iP66 Control box, IP66 Three plug | |
Plugging Force | <=100N(charging gun), <=54N(three plug) | |
Mechanical Life | >=10000 times | |
Vehicle Rolling | (8+-2) Km/h Speed test,>5000+-250N | |
Use Environment | altitude<=2000m | |
Storage Environment | -4°C ”+85°C 、relative humidity 25%~85%,No condensaticn | |
Working Temperature | -25°c ~ +50°C | |
CP Duty Cycle | When charging is not started, the CP duty cycle is 0%; After starting charging, the charging current of 16A plug specification is 13A, and the Cpduty cycle is 26.7%+-0.5%; | |
Executive Standard | • IEC 62196.1-2020 • IEC 62196.2-2020 • IEC 61851-1-2017 • IEC 62752-2016 | |
Wiring Specification | • EV charger:3*2.5mm²+1*0.5mm² • Three plug:3*2.5mm²+2*0.5mm² | |
Functional Parameters | Working power supply | 220V士20% ,50Hz, single phase |
Charging current | 16A (rated 13A) | |
CP terminal PWM signal | Amplitude: up 12VDC, frequency =1kHz | |
Overcurrent protection | Support | |
Overvoltage protection | Support | |
Undervoltage protection | Support | |
Leakage protection (tpye type A) | Support | |
Grounding protection | Support | |
Temperature protection | Support |
Number | Project | Material | Color, Finish |
1 | Plug | PA66+GF | Black |
2 | Terminal | Brass | Copper base, nickle plated, silver plated |
3 | Terminal Fastener | PA66+GF | Black |
4 | Shell | PC | Black |
5 | Hook | PC | Black |
6 | Tail Sheath | Silicone rubber | Black |