Name | CAMC H9 low floor tractor with natural gas engine | ||
Brand / Series | CAMC / H9 (FUSO type) | ||
Drive type | 6×4 | ||
Wheel base(mm) | 3200+1350 | ||
Quasi-tow mass (kg) | 40000 | ||
Kerb Weight (kg) | 8805 | ||
GVW (kg) | 25000 | ||
Overall dimension (mm) | 6940x2495x3300 | ||
Driving position | Left or Right hand drive available | ||
Saddle | JOST 50/90 | ||
CAB | |||
Type | CAMC H9 high roof Cab | ||
Color | Standard color: red, yellow, blue, white; others: optional but charge | ||
Parameter | With two berth、Berth curtain、Leather 4-spoke Steering Wheel、Rear window、electronic and Hydraulic reversal cab、power window, hydraulically damped adjustable driver’s seat and rigid adjustable co-driver’s seat, heating & ventilation system, adjustable roof flap, with stereo radio and MP3, and adjustable steering wheel, air horn, single berth with 4-point support fully floating suspension and shock absorber with transverse stabilizer, safety belt. | ||
Others | A/C, radio,MP3, one sleeper, curtain etc. | ||
ENGINE | |||
Supplier | CAMC—The Chinese most advanced truck Engine Producer | ||
Model | CM6D30.550 30 | ||
Type | Four-stroke, water-cooled, in-line, wet-liner, direct-injection | ||
Maximum power/horsepower(kw/hp) | 404/550 | ||
Maximum rated speed(rpm) | 1800 | ||
Max torque(N.m/rpm) | 2500/1100-1400 | ||
Cylinders | 6 | ||
Bore x Stroke (mm) | 130*161 | ||
Displacement (L) | 12.8 | ||
Controller type | Electrical | ||
Air cleaner | Dry paper element | ||
Emission Standard | Euro Ⅲ | ||
TRANSMISSION | |||
Supplier | CAMC (same level as ZF technology) | ||
Model | 16SDB2500 | ||
形式 Type | Mechanical & manual with servo & Synchronizer & creep | ||
Speed ratio | 16 forward ratio: 16.81, 13.95,11.67,9.69,8.05,6.68,5.45,4.52,3.72, 3.09, 2.58, 2.14, 1.78, 1.48, 1.21, 1.00 | ||
2 reverse ratio:15.32, 12.71 | |||
CLUCH | |||
Type | Single- plate dry diaphragm spring clutch, diameter 430(A) mm, hydraulically operating with air assistance | ||
Plate diameter | 430mm | ||
STEERING SYSTEM | |||
Driving posiTion | Left or Right hand drive available | ||
Type | hydraulic steering with power assistance | ||
Ratio | 22.2-26.2:1 | ||
Axle | |||
Suplier | CAMC | ||
Front axle | CAMC technology steering axle with double T-cross section, Rated capacity:7.5T | ||
Rear axle | CAMC technology 16T casting axle , with double reduction and differential locks between axles, Rated capacity:16T | ||
ratio:4.267 | |||
Frame | |||
Type | U-profile parallel ladder with section and reinforced subframe, all cold riveted cross members | ||
Size (H*W*t) | Height:310m, Width:90mm, Thickness:8mm+8mm (Double) | ||
Width (front/rear) | 976mm/856mm | ||
Suspension | |||
Front suspension | 9 semi-elliptic leaf springs with hydraulic telescopic double-action shock absorbers and stabilizer | ||
Rear suspension | 12 semi-elliptic leaf springs with bogie spring and stabilizer | ||
BRAKING SYSTEM | |||
Type | Drum braking | ||
Service brake | dual circuit compressed air brake | ||
Parking Brake (emergency brake) | spring energy, compressed air operating on rear wheels | ||
Auxiliary braking | engine exhaust brake and ABS | ||
Electrics | |||
Operating voltage | 24V | ||
Starter | 24 Volt/7.80kw | ||
Alternator | 3-phrase, 28V, 1540W | ||
Batteries | Two batteries 2*12 Volt – 150 AH*2 | ||
OTHERS | Cigar-lighter, horn, headlamp, fog light, brake light | ||
Dimensions(mm) | |||
Front wheel track | 2065 | ||
Rear wheel track | 1860 | ||
Front overhang | 1550 | ||
Rear overhang | 1020 | ||
other Weight(KG) | |||
Front axle loading capacity | 7500×1 | ||
Rear axle loading capacity | 16000×2 | ||
Performance | |||
Maximum driving speed(km/h) | 83.1 | ||
Maximum gradeability (%) | 35 | ||
Minimum ground clearance(mm) | 320 | ||
Minimum turning radius(m) | 7.02 | ||
Fuel consumption(L/100km) | 35 | ||
Approach angle(o) | 24 | ||
Departure angle(o) | 23 | ||
TYRE | |||
Type | 11R22.5 vaccum tire, 10+1 pieces | ||
FUEL TANK | |||
Type | 500L iron / aluminium alloy tank | ||
OTHERS | |||
Warranty | 12 months unlimited mileages or 100000km which occur first | ||
Lead time | 35 working days |