Technical Parameters
Max gas output | 300L/h |
Frequency | 50/60Hz |
Max.Working Pressure | 2kg/cm3 |
Max.water consumption | 0.11L/h |
Water Feed | Manual |
Max.Flame Modifier Consumption | 0.1L/h |
Flame Modifier | Manual |
Rated Power | 1200W |
Ventilation Space Requirement | 200mm in each direction |
Net weight | 24KG |
size( L*W*H)(MM) | 450*250*510 |
Oxyhydrogen Flame Ampoule Filling and Sealing Machine / Ampoule Sealer / Ampoule Sealer Machine /Glass Ampoule Sealing Machine technology uses water as medium to electrolyze water into H2 and O2, fire them to formed Oxyhydrogen Flame. The temperature of Oxyhydrogen flame is as high as 2800 degrees so that it can seal the Ampoules very fast. The quality and speed of Oxyhydrogen Flame sealing method is higher than Liquid gas's.
What is the advantages?
Traditional ampoules sealing machine adopts liquid gas as fuel and air as combustion-supporting gas.The producted flame contains carbon dioxide, carbon monoxide and nitrogen compounds,these substances will impact on the quality of pharmaceuticals and bring security hidden danger to work environment. According to the request of scientific research personnel, Our Okay Energy Equipment Co.,Ltd adopts Oxy-hydrogen generetor to seal the ampoules.
1. Safety
Oxy-hydrogen Flame Ampoules Sealing Machine just uses water and electricity, no gas bottle, no hydrogen gas storage, no leakage and explosive danger.
2. Convenience
it can work just with water and electricity, every litre water can be used 7~8 hours. But Liquid gas bottle need to be changed by manual moving, it is very inconvenient.
3. Cleanliness
Oxy-hydrogen combustion just produces little water vapour, there is no harm to the pharmaceuticals. But Liquid gas combustion produces carbon dioxide, carbon monoxide and nitrogen compounds which will impact on the quality of pharmaceuticals.
4. High Efficiency
The speed of Oxy-hydrogen Flame sealing method is higher than Liquid gas's.
How to Operate?
1. Install the Oxyhydrogen Flame Ampoule Filling and Sealing Machine according to the Operating Instruction, then connect the pipe, adjust position up and down.
2. Open the Power Supply switch of Oxyhydrogen Flame Ampoule Filling and Sealing Machine, start to produce gas, when the air pressure rises to 0.1Mpa, you can open the torch valve.
3. Firing to formed Oxyhydrogen Flame, can adjust flame size further through valve adjustment.
(Remark: When firing, pls don't let any part of the body be in front of the torch nozzle.When firing, you should be in the side of the torch to avoid firing your hands.)
4. Using the tweezer attached with machine to nip ampoule, the tautness of nipping should guarantee the ampoule not only won't come off, but also can rotate it with hand.
5. To put the ampoule in Oxyhydrogen Flame to heat and rotat it at the same time. When heating is finished, pull up the tweezer, the process of sealing is accomplished.
What can HHO Generator do?
• Jewelry Welding
• Acrylic Polishing
• Ampoule Bottle Sealing
• Boiler Combusting
• Carbon Steel Cutting
• Burning Gabage etc.
What are the HHO Generator operation steps?
Agents/Distributors/Dealers are warmly welcomed!
Okay Energy Equipment Co.Ltd
Address:No.27,Wenxuan Road,Yuelu District,Changsha City,China
Tel: 0086-731-83979221
Web: www.okayenergy.com