Cap/Hat Heat Press Machine A
Machine instructions |
|
Voltage |
220V/110V |
Power |
380W |
Working Size |
8.5*15cm |
Time range |
0-399s |
Temperature range |
0-999°C |
Packing |
Export Carton-Foam Packing |
Packing Size |
60*44*33cm |
N.W. |
15kg |
Specific Operating |
|
1.firstly adjust board pressure make board balance. |
|
2.Connect the plug with 220v,open the power switch,then its indicator lights(Attention:the whole machine must have the protecting ground wire) |
|
3.put print cap on the cushion,handle press board make clothes flat |
|
4.Adjust the needed temperature(actually 180-200°) and time(actually 40-45s) |
|
5.Put the cap on the silicone pad,then put the picture on the clothes,with the handle forced under pressure until it is completely closed;(the press is no more than 30kg,otherwise the handle will be deform) |
|
6.When the time is up,the warning buzzers,then put the handle back into place; |
|
7.If the transfer paper is the hot one,pls tear it up at once; If the transfer paper is the cold one,pls tear it up after 10-15seconds. |