Factory Price Direct Sale Magnetic Drum Separator Bottom Price Magnetic Separator Dry For Flour Mill

Magnetic separator is one essential equipment in the ore dressing process which can separate raw materials with different magnetic rigidities.It is mainly used for screening the magnetic and non-magnetic material from the mineral powder and mineral pulp.The magnetic system of a magnetic separator is a compound of fine ferrite material and rare earth magnets.The average magnetic induction intensity of the surface of the cylinder is 100~600mT.   

Main Type Sand Application of Magnetic Separator                  

1.Magnetic separator is suitable for the wet magnetic separation of the materials whose granularity is below 3mm such as magnetite, pyrrhotite, calcined ore and ilmenite and can also be used for removing iron from the materials such as coal, non-metal ore,and building material.

2.The permanent magnetic force tumbler is suitable for:
♦ After medium and fine crushing, the magnetic pulley is used for eliminating the wall rock in the iron ore to improve the fineness.
♦ To the un-deoxidized ore and send back for re-agglomeration.
♦ To eliminate iron in the ceramic industry for improving the ceramic quality.
♦ To eliminate iron in coal, foundry sand, refractory, and other industries.

Features                                                     

1.simple structure;

2.Easy-open structure gives a convenient cleaning;

3.large handling;

4.easy to operate;

6.The number of axial magnetic can be adjusted in accordance with material characteristics.

7.easy to maintain.

8.This magnetic separator is suitable for processing various bulk materials and will not be blocked for its compact structure;

9.Low power;

10.It also has a disaggregating function for sticky and poor-fluidity powders;

11.A stainless steel machine and full-closed operation enable an easy clean;

12.This high gradient magnetic separator has an optimized magnetic circuit,which offers a high-intensity magnetic field for a better separating effect;

13.Magnetic separator working under high temperature.

Working Principle                                       

The pulp flows into the cell body from the pulp box,and under the water flow of the feeding spray pipe,the mineral grain will go into the feeding area of the cell body in the loose condition.In the magnetic field,the magnetic ore particles will have magnetic gathering and form magnet group or magnet chain which is influenced by the magnetic force inside the pulp and moves to the magnetic pole and finally is absorbed onto the cylinder.

The Nile Co.,Ltd.is committed to designing,producing grinding mills,crushers,conveyors,feeding machines,drying and calcinating as well as beneficiation equipment,fine sand recycling equipment etc,which are widely applied in electricity,metallurgy,mine and quarry, wharf,granary,chemical industry.Our products have been spread all over China,and also exported to European,American,Asian,African countries and enjoyed great popularity among our customers.

Our company owns an experienced and skilled sales and service team which compose a perfect service network.We will send the professional engineers to the installation sites and provide guidance for the installation,commissioning and initial run as well as planning administration of the equipments after purchase. 

We can not only provide good quality sand making machine,  but also provide the best service for our clients. The series of professional technology services will make you have an excellent product experience.

Pre-sale services:

(1) The advice of model choice.
(2) Design and manufacture machines according to customer's special requirements
(3) The company is free of charge to the user on-site engineering and technical personnel planning site for the user to design the best processes and program

 After-sale services :

(1) Arrange technicians to go to the site to guide installation
(2) If your machine is out of warranty period, you can go to the Nile's overseas office to buy spare parts.
(4) complete sets of equipment installed, 1-2 full-time technical staff to stay free of charge to help customers on-site production of 1 month, until the user' satisfaction.

Q1: Are you factory or trade company?
A1: We are factory.

Q2: Where your products have been exported before?
A2: Our products have been sold to South Asia, Africa, South America, middle East and so on.

Q3: How will you help the customer to install the equipment?
A3: Our senior engineer will guide the installation and commissioning as well as the initial production at

Q4: How about the wear parts supply?
A4: We offer wear parts to our customer with our most favorable price. If there are problems youcould not handle, we will send our technicians to your place and you are therefore, responsible for all thecost involved.

Q5: What about the payment method?

A5:T/T, L/C Paypal is available

Q6: What about after-sale service?
A6:12 months warranty for all kinds of products.