Metal Strip Forming Machine
Induction Heating Forging Furnace
Models | Unit | DN2-31X | DN2-31C | DN2-40X | DN2-40C | DN2-63X | DN2-63C |
Power at 50% | KVA | 31 | 31 | 40 | 40 | 63 | 63 |
Transformer turns ratio |
| 70 | 70 | 56 | 56 | 48 | 48 |
Maximum short circuit current | KA | 14 | 14 | 18 | 18 | 20 | 20 |
Secondary unload voltage | V | 5.58 | 5.58 | 6.8 | 6.8 | 7.9 | 7.9 |
Voltage at 50Hz/60Hz | V | 380 | 380 | 380 | 380 | 380 | 380 |
Distance between the arms | MM | 168-288 | 100 | 168-328 | 100 | 168-428 | 100 |
Min. length of arms | MM | 220 | 200 | 300 | 200 | 400 | 200 |
Max. strength at electrodes | N | 3000 | 3000 | 3500 | 3000 | 3500 | 3000 |
Working stroke | MM | 15-45 | 15-25 | 15-45 | 15-25 | 15-45 | 15-25 |
Max. stroke of cylinder | MM | 70 | 50 | 100 | 50 | 100 | 50 |
Max. arm length | MM | 750 | 350 | 1000 | 450 | 1100 | 500 |
Compressed Air supply | MPa | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
Max. thickness of mild steel sheet with Min. length’s arm | MM | 3+3 | 3+3 | 4+4 | 4+4 | 5+5 | 5+5 |
With 500mm arms | MM | 2+2 | 2+2 | 3+3 | 3+3 | 3+3 | 3+3 |
With maximum length arms | MM | 1.2+2 | 1.2+1.2 | 2+2 | 1.8+1.8 | 2.0+2.0 | 2.0+2.0 |
Cross wire maximum | MM | 14+14 | 14+14 | 16+16 | 16+16 | 20+20 | 20+20 |
Cooling water pressure | MPa | 0.2-0.3 | 0.2-0.3 | 0.2-0.3 | 0.2-0.3 | 0.2-0.3 | 0.2-0.3 |
Cooling water flow | L/Min | 4 | 4 | 4 | 4 | 4 | 4 |