Welcome to TradeChina
Factory Low Cost Offer CHEAP but highly easy connection 70mm ABS inclinometer casing
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
Installation method | 1,Select the appropriate installation location according to the requirements of the site and measurement specifications. 2,On the cement road surface, drill the corresponding depth with the corresponding dimeter of mm. 3,Insert the fixed glue into the hole. 4, Press in the measuring pin, mark well, and wait for solidification |
Our service | 1, sample---we can supply nails for testing 2,The sample fee will be refunded after receipt 3,Loge set---We can print logo and label on the product according to customer's requirement 4,Packaging can be customized according to the needs 5,Customer test---Ensure products in super quality and good condition. 6,We will provide the best service to meet the needs of our customers. 7, We can Custom various packing for different fields clients, support one-stop solution for your package |
Usage
Soil burying method
1. First use the drill to make a hole, the hole diameter is 110mm, and the verticality is 1%;
2. Use screws to install the bottom of the inclinometer tube on the bottom of the pipe. When connecting the inclinometer tube, make sure that the sections of the two inclinometer tubes are in close contact (hear the impact sound of the two tubes inserted into the section), then tighten and fix them with screws. If possible, seal the joint at last;
3. When putting down the tube, the cross groove of the inclinometer tube should be vertical to the direction of displacement. If the buoyancy affects the running down of tube, flush water into the tube to increase the falling force of the tube to ensure the verticality. If it is still difficult to put the pipe after flushing (collapse phenomenon occurs in the deeper part of the drilling), you can place a wooden block on the pipe and press it in with a drill;
4. After the tube is put down, the surrounding area should be filled with sand several times. If there are cars or pedestrian passing by on the ground, a small manhole should be made below the ground and covered with a special rubber expansion cover toprevent ground mud or debris from entering the inclinometer tube, set a mark number; a special reinforced protective cover canalso be used to prevent it from being crushed by heavy trucks etc..
Buried method of underground continuous wall
1. Before placing the reinforcement cage, tie the inclinometer tube to the inner side of the outermost steel bar of the
reinforcement cage, and bundle it every 1 meter. It is important to note that one pair of cross guide grooves in the
inclinometer tube should be coaxial with the continuous wall, and the other pair of guide grooves are naturally vertical to
the continuous wall.
2. When inserting the inclinometer tube, the sections of the two tubes should touch and collide. After the screws are tightened, the joints must be sealed to prevent water seepage.
3. In addition to sealing the bottom of the inclinometer tube with a plastic bottom, the bottom 2-3 meters of the inclinometer tube should be put into a steel pipe with a larger diameter for protection. The head of the steel pipe is processed to be cone and welded by electric welding. The steel pipe is electric welded to the reinforcement cage to ensure that the bottom of the inclinometer tube is not damaged when the reinforcement cage is put down.
4. Before pouring the concrete, the inclinometer tube should be filled with clean water. Make sure that the inclinometer tube is always filled with clean water during the pouring process.
5. Finally, protect the top of the inclinometer tube.
Soil burying method
1. First use the drill to make a hole, the hole diameter is 110mm, and the verticality is 1%;
2. Use screws to install the bottom of the inclinometer tube on the bottom of the pipe. When connecting the inclinometer tube, make sure that the sections of the two inclinometer tubes are in close contact (hear the impact sound of the two tubes inserted into the section), then tighten and fix them with screws. If possible, seal the joint at last;
3. When putting down the tube, the cross groove of the inclinometer tube should be vertical to the direction of displacement. If the buoyancy affects the running down of tube, flush water into the tube to increase the falling force of the tube to ensure the verticality. If it is still difficult to put the pipe after flushing (collapse phenomenon occurs in the deeper part of the drilling), you can place a wooden block on the pipe and press it in with a drill;
4. After the tube is put down, the surrounding area should be filled with sand several times. If there are cars or pedestrian passing by on the ground, a small manhole should be made below the ground and covered with a special rubber expansion cover toprevent ground mud or debris from entering the inclinometer tube, set a mark number; a special reinforced protective cover canalso be used to prevent it from being crushed by heavy trucks etc..
Buried method of underground continuous wall
1. Before placing the reinforcement cage, tie the inclinometer tube to the inner side of the outermost steel bar of the
reinforcement cage, and bundle it every 1 meter. It is important to note that one pair of cross guide grooves in the
inclinometer tube should be coaxial with the continuous wall, and the other pair of guide grooves are naturally vertical to
the continuous wall.
2. When inserting the inclinometer tube, the sections of the two tubes should touch and collide. After the screws are tightened, the joints must be sealed to prevent water seepage.
3. In addition to sealing the bottom of the inclinometer tube with a plastic bottom, the bottom 2-3 meters of the inclinometer tube should be put into a steel pipe with a larger diameter for protection. The head of the steel pipe is processed to be cone and welded by electric welding. The steel pipe is electric welded to the reinforcement cage to ensure that the bottom of the inclinometer tube is not damaged when the reinforcement cage is put down.
4. Before pouring the concrete, the inclinometer tube should be filled with clean water. Make sure that the inclinometer tube is always filled with clean water during the pouring process.
5. Finally, protect the top of the inclinometer tube.
Our service
1, sample---we can supply nails for testing
2,The sample fee will be refunded after receipt
3,Loge set---We can print logo and label on the bottle according to customer's requirement
4,Packaging can be customized according to the needs
5,Customer test---Ensure products in super quality and good condition.
6,We will provide the best service to meet the needs of our customers.
7, We can Custom various packing for different fields clients, support one-stop solution for your package
2,The sample fee will be refunded after receipt
3,Loge set---We can print logo and label on the bottle according to customer's requirement
4,Packaging can be customized according to the needs
5,Customer test---Ensure products in super quality and good condition.
6,We will provide the best service to meet the needs of our customers.
7, We can Custom various packing for different fields clients, support one-stop solution for your package
Transportation
FAQ
Q1:Can I have my unique design(size, volume, pattern, etc.)?
Yes, customer’s design such as size, ,etc. is welcomed.
Q2:Can I have a custom designed and mock up sample?
We design and construct each project to the individual customer's needs.
Q3:Sample free or need to pay?
If the cost of the product below $5 you would not pay the sample cost Just tell us your freight collect account like FedEx DHL
TNT, if you don't have account,
it need to charge Express fee properly.
Q4: What is MOQ?
1) stocked model 1pcs above
2) customized size/design/shape, MOQ 3000-10000pcs
Q5: How long is your delivery time?
Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q6: What are your terms of payment?
A. For samples,3-5 days working days door to door by air.
B. For stocks, within 7days can be shipped to loading port.
C. For mass production, it takes 25-35days for production. More 7-10days if custom
design needed.
Q7: What's the order processes?
1)Custom Design--Making custom mold/logo/package first.
2)Samples--Making samples for you check.
3)Confirm Order- Signing sales contract after samples confirmed.
4)Deposit-- 30% deposit before mass production.
5)Production arranged--we will process the production.
6)Remaining payment--after inspection, balance before shipment.
7)Shipping--we will ship the goods to destination port.
8)Confirm bill of loading/commercial invoice/packing list/certificate of origin
9)After sales service.
Q8: If any defective product, how do you deal with?
We have 1:1 replacement for the defective product.
Warn Tips: Any man-made damage we cannot change, refund or make up.
Q10: What is the lead time of production?
A. For samples,3-5 days working days door to door by air.
B. For stocks, within 7days can be shipped to loading port.
C. For mass production, it takes 25-35days for production. More 7-10days if custom
design needed.
Yes, customer’s design such as size, ,etc. is welcomed.
Q2:Can I have a custom designed and mock up sample?
We design and construct each project to the individual customer's needs.
Q3:Sample free or need to pay?
If the cost of the product below $5 you would not pay the sample cost Just tell us your freight collect account like FedEx DHL
TNT, if you don't have account,
it need to charge Express fee properly.
Q4: What is MOQ?
1) stocked model 1pcs above
2) customized size/design/shape, MOQ 3000-10000pcs
Q5: How long is your delivery time?
Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q6: What are your terms of payment?
A. For samples,3-5 days working days door to door by air.
B. For stocks, within 7days can be shipped to loading port.
C. For mass production, it takes 25-35days for production. More 7-10days if custom
design needed.
Q7: What's the order processes?
1)Custom Design--Making custom mold/logo/package first.
2)Samples--Making samples for you check.
3)Confirm Order- Signing sales contract after samples confirmed.
4)Deposit-- 30% deposit before mass production.
5)Production arranged--we will process the production.
6)Remaining payment--after inspection, balance before shipment.
7)Shipping--we will ship the goods to destination port.
8)Confirm bill of loading/commercial invoice/packing list/certificate of origin
9)After sales service.
Q8: If any defective product, how do you deal with?
We have 1:1 replacement for the defective product.
Warn Tips: Any man-made damage we cannot change, refund or make up.
Q10: What is the lead time of production?
A. For samples,3-5 days working days door to door by air.
B. For stocks, within 7days can be shipped to loading port.
C. For mass production, it takes 25-35days for production. More 7-10days if custom
design needed.
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier