Factory Flat Bed Computerized Knitting Machine

                         Factory Flat Bed Computerized Knitting Machine

1.Function: Knitting, tucking, missed loop and transfer. Pretty strong in intarsia knitting when equipped with the new developed intarsia feeder pattern certification.

Special Function:Special design in yarn feeding way.The knitting system and yarn feeding device are separate. The yarn device stays on the top side of the machine which makes yarn feeding easier and more balanceable. This design makes it possibility to produce very complex fabric like intarsia.

2.Applicable Fabric:Cable, transfer, pointelle, shaped knitting, single-layer jacquard with missed loop, double- layer jacquard (maximum 6 colors within one knitting round), engraved pattern, etc.

3.Needle Selection:The 10-section selector composed of special magnets can select the needle to three full jacquard positions and is capable for thin needle and high speed knitting

Feeder:Normally 15 feeders are equipped as standard. For special knitting it can be equipped over 44 feeders. All feeders are controlled by computer

4.Sinker:Special sinker and control device which makes comprehensive knitting easy

5.Attern Storage:Large storage, over 100 pattern files storage ability, maximum 2G storage

6.Knitting Speed:24 levels speed control with the capability to adjust slightly on each level. Max 1.0m/s

7.Drive Type:AC servomotor

8.Density Control:24 sections electrical control with the capability to adjust slightly on each section. Tucking density is not necessary when there is knitting and tucking within one knitting round.

9.Shaker Control:Max 2 inches shaking range from left to right. 24 sections tiny shaking adjustment and the minimum adjustment is 0.0125mm.

10.Scissors & Clamp:Scissors & Clamp:Break pieces automatically when bulk knitting
Winding Device:Winding Device:24 sections winding adjustment with the capability to adjust slightly on each section.

11.Stop Device:Stop automatically with signal and sound alarm when yarn breakage, yarn knot, needle broken, overload or program error.

12.Signal Lamp:Green--Knitting, Yellow--Jogging, Red--Stops abnormally

13.Power:Single phase AC220V,0.75KVA.

14.Safety Protection:Equipped with electricity safety protection

15.Dimension:2,400mm*1,000mm*2,100mm

16.Weigh:Net 630KG

About us 

Welcome to enquire Factory Flat bed computerized Knitting Machine!

You are warmly welcome to visit our factory!!