I Main application:
This machine is applied as supporting equipment before fine crushing process in pharmacy, chemical industry, metallurgy, construction and so on, which has better crushing effect for any material without limitation on its viscosity, hardness, softness and fiber, etc..
II Working principle
This machine is of horizontal crushing structure. The material is fed into the crushing chamber through a hopper; crushed by simultaneous cutting of both fixed and movable knives and rotating impact of rotating knife; and is flowed to the exit automatically under the effect of rotating centrifugal force. Besides, this machine is designed according to GMP standard and wholly made of stainless steel. It is simple in structure, convenient to clean and low in nose, the most perfect equipment in present coarse crushers.
Three:The installation and trial run and the use
1st, After opening a box, careful tester in transportation process whether to damage.
2nd, The inspection crushes indoor whether to have the metal perfect and so on by the sundry goods.
3rd, Inspects each fastening screw whether to have becomes less crowded, according to needs the granularity adjustment to resort to arms and to decide between knife's distance, chooses and matches the corresponding strainer.
4th, Starting, the starting motor confirmation revolution direction, does not have the static, namely from dog-house processing imported materials production.
5th, After producing normally, this machine test run five minute later normal works.
6th, In production process with, if must replace the strainer, only need leave the hopper the anchor screw to twist off first, then leaves the hopper to turn backward, decides knife's anchor screw to twist off, from decides under the knife to take out the strainer.