Advantage:
1.excellent performance
2.close tolerance
3.longer service life
4.shortest delivery tim
The role and characteristics of the product
1. The slope adjustment screw template friction between the resin and about one-quarter turn can be combined closed mold about 50,000 times;
2. The mold means taking unloading easy, simple, low prices.
3. The device can also be used in a small outlet plate and hit the board or the top of the workpiece Sec or carriage of small outlet on;
4. Mold or less by weight of 100Kg ?12-4 months, 500KG the following with ?16-4 months, 1000Kg with ?20-4 the following months, when more than 1000Kg
increase of 6 or more.
5. Resin embedded public template about 3 cm hole master mold of machined to H7 reamer to + 0.1mm range.
6. The master mold surface, please processed into R-shaped, as do the chamfered C surface, the durability is poor.
7. Do not refuel the resin, will make less friction.
8. Color: White, yellow, orange, blue four, blue can be high temperature of 160 degrees.
This product uses special nylon material, has good wear resistance and heat resistance, heat-resistant nylon casing temperature, although for 150 ℃, but in actual use, and therefore continue to be tapered locking bolt the role of stress It will result in less durable nylon sleeve, normal use temperature below 80℃.
Material: nylon resin + high-strength alloy steel SCM435
This product has orange and yellow and white are three diameter 10,12,13,16,20 five kinds
Sleeve outer diameter 10 M5 thread length 18 total length 30 pack 12PCS
Sleeve outer diameter 12 M6 thread length 20 total length 34 pack 12PCS
Sleeve outer diameter 13 M6 thread length 20 total length 34 pack 12PCS
Sleeve outer diameter 16 M8 thread length 25 total length 40 pack 12PCS
Sleeve outer diameter 20 M10 thread length 30 total length 45 pack 10PCS
Installation
1.Insert parting Locks into die mold about 3mm.then using H7 reamer to process mold hole within +0.1mm range.
2.Process mold surface to the shape of letter R.If processing to the chamfering of letter C.it weill shorten its life cycle.
3.DO not add any oil on parting locks.doing so will reduce the friction.