2. Stable and reliable
3. Adjustable precision
Technical parameters of flow meter | ||||||||
1 | model Type | FM1(1)、FM1(2)、FM1(3)、FM1(4) | ||||||
2 | forms | Four-piston volumetric flowmeter (adjustable type) | ||||||
3 | Conditions of use of oil | A) Oil product name: gasoline, kerosene, diesel oil B) Common pressure: 0.3Mpa C) Viscosity: below 8 MPa · S D) Additives: 10-15% ethanol | ||||||
4 | Environmental conditions | A) Temperature: -25 ~ 40℃ B) Humidity: 5 ~ 95% | ||||||
5 | Use flow range | 5~90L | ||||||
6 | compressive strength | 4 MPa | ||||||
7 | structure pressure (can restore the function of pressure Force) | 2 MPa | ||||||
8 | emissions | 0.5L/flowmeter output shaft per revolution Adjusting hole adjustment: about 0.1% / 2 holes | ||||||
9 | device differential accuracy | Plus or minus 0.2% | ||||||
10 | adjustment range of device difference | -0.6% -- + 1.0% (Adjuster poor beyond this range will result in a regulator A damaged) | ||||||
11 | Pressure loss | 0.027 Mpa (40 l/min) | ||||||
12 | installation | Vertical installation (tilt less than 3°, the upper cover of the flowmeter shall be above | ||||||
13 | Vibration resistance | JISZ200 standard III | ||||||
14 | Consuming parts | Oil seal, after disassembly, sealing parts, friction parts | ||||||
15 | Daily inspection/precautions | A) Daily and regular spot inspection items: leakage, abnormal vibration, abnormal sound and poor device performance B) Precautions: 1. Do not mix with water and foreign matter 2. It is recommended to install it at the front end of the oil inlet of the flow meter Over 200 mesh strainers | ||||||
16 | Rotation direction of output shaft | Turn right (as seen from above the output shaft) |