Factory Direct Carbon Steel Spiral Vibrating Tray Feeder

brief introduction of Factory Direct Carbon Steel Spiral Vibrating Tray Feeder

Two-stage drop structure improves the ability to pre-screen materials.

GF Vibrating Feeder is the grizzly feeder driven by the vibrating motor. As an efficient primary feeder, it is specially designed for mobile crushing stations (also known as “mobile crushers), semi-fixed crushing lines and small stock ground (Usually, the capacity is below 250TPH and the available volume of material silo is below 30m3.) It is suitable to feed materials into jaw crushers, primary impact crushers and hammer crushers, etc. Sometimes, it functions as a primary conveyor.

Input Size: 0-500mm

Capacity: 0-850t/h

Applicable Materials: granite, marble, basalt, limestone, quartzite, pebble, copper ore, iron ore, coal, etc.

SP series is a new type of vibrating feeder developed by ZENITH on the basis of many years of practical experience in R & D, combined with the practical application of feeding and conveying equipment, and widely drawing on the independent R & D of cash metal at home and abroad. The equipment is simple and compact in structure, high in production capacity, reliable in operation and convenient in maintenance. It can be used to evenly and continuously feed small and medium-sized block, grain and powder materials from the storage bin to the receiving device. It is an ideal upgrading product of the traditional GZG or GZD Inertial Vibration Feeder.

Product Advantages of Factory Direct Carbon Steel Spiral Vibrating Tray Feeder 

GF Feeder's biggest vibration strength can reach 4.0G and its capacity is 20% higher than traditional TSW Feeder.

GF Vibrating Feeder adopts a drop structure composed of two layers of grizzly bars, which can effectively screen out fine materials whose size is smaller than that of CSS.

GF Vibrating Feeder takes vibrating motor as the vibration source. Users can control vibration force by adjusting the motor. The operation is quite easy, convenient and stable.

Compared with traditional metal spring, the rubber spring GF Vibrating Feeder adopts owns higher holding capacity and longer service life.

SP series vibrating feeder adopts vibrating motor as the excitation source, and two vibrating motors are placed on the tank body at the rear or side. Its working principle is that two vibrating motors rotate in the opposite direction. When the motor rotates, the eccentric blocks at both ends of the motor generate the exciting force, and the driving equipment makes reciprocating linear vibration in the inclined direction of the feeding tank. When the component of tank vibration acceleration is greater than the component of gravity acceleration in the vertical direction, the materials in the tank are thrown up, and jump forward according to the trajectory of parabola. Every time the tank vibrates, the materials are thrown up once, so that the materials continuously jump forward at the tank vibration frequency, so that the materials are pushed slowly from the feeding end to the discharging end to achieve the purpose of feeding.

Product parameter of Factory Direct Carbon Steel Spiral Vibrating Tray Feeder

Working Principle of Factory Direct Carbon Steel Spiral Vibrating Tray Feeder

SP series vibrating feeder adopts vibrating motor as the excitation source, and two vibrating motors are placed on the tank body at the rear or side. Its working principle is that two vibrating motors rotate in the opposite direction. When the motor rotates, the eccentric blocks at both ends of the motor generate the exciting force, and the driving equipment makes reciprocating linear vibration in the inclined direction of the feeding tank. When the component of tank vibration acceleration is greater than the component of gravity acceleration in the vertical direction, the materials in the tank are thrown up, and jump forward according to the trajectory of parabola. Every time the tank vibrates, the materials are thrown up once, so that the materials continuously jump forward at the tank vibration frequency, so that the materials are pushed slowly from the feeding end to the discharging end to achieve the purpose of feeding.

Pre-sales Service:
The wide product range enables us to provide our customers with stand-alone machines or complete processing plants. Based on our customers’ request and budget, our experts make efficient, reliable solutions. Following customers’ order we produce strictly, what’s more, before placing the order every customer has the chance to visit zenith working machines or complete plant in the site.

To ease the trip for every visitor to China, in particular the first-time visitor, we provide FOR FREE all relevant visitor-friendly services including invitation letter preparation, hotel reservation, airport pick-up, incity transportation, and sightseeing guide, etc.

After-sales Service:

Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customers’ plants. Necessary training about machine daily maintenance to local workers is provided also.

After-Sales department is made of well-trained employees and installation engineers, the installation engineers are special and professional members of Zenith, they are now strategically located home and abroad, working for our customers.

Shanghai Zenith is committed to providing users with the new, reliable and productive equipment.  Zenith engineers have rigorously tested our products .

Zenith products have acquired :

Russian GOST Certificate

EU CE Cetificate

ISO Quality Management Certificate

China Good Enterprises

China Credit Example Certificate , etc.

SHANGHAI ZENITH MINERAL CO.,LTD. is a hi-tech, engineering group. We are specialized in the research, development, and production of industrial crushing, powder grinding, mineral processing equipments and other related devices.

Our products have been sold to 160 countries and areas of Southeast Asia, East Europe, South America, the Middle East and Africa etc, and more foreign markets will be promoted in future.

Exhibition

Zenith participate in various exhibitions frequently,such as Bauma China,China Import and Export Fair , Asia-pacific's International Mining Exhibition, Bauma Africa,  CONEXPO Latin America , etc.

Minimum Order Quantity

A: The minimum order quantity is 1 Set

Delivery time

A: The lead time is 10-30 days, Delivery time will vary depending on the type of the machine, shipping method selected and part availability.

FOB Prices

A: Different machine has different FOB price, please send your interest type, raw material, capacity, Your contact information, we will give you a reasonable FOB price as soon as possible

Payment terms

A: Accepted Payment Type: T/T, L/C, Western Union, Cash

After sign the contract, pay the 10%-30% deposit of total purchase price and pay the full payment before delivery.

Products warranty

A: The Products warranty is one year.

In order to recommend the suitable models and supply more complete quotation for you, Send your Requiry Details in the below!

  Include:

1. Which machine do you need?

(such as crusher, grinding mill, sand making machine, concrete batching plant,vibrating screen, vibrating feeder, belt conveyor and other beneficiation equipment)

2. Which kind of material you are going to process?

Soft stone (dolomite, limestone and others) or hard stone (granite, basalt, river pebble and others) ?

3. What's the production capacity per hour you want?

How many tons or cubic meters per hour?

4. You want only a machine or a complete production line?

  And please tell me your email and phone or whatsapp, I will give you factory price with full specification and you will know all details about machine and discount.