FTTH Solution 1GE XPON ONU Home Gateway Unit FTTH ONT With RF Output Interface
FTTH Solution 1GE XPON ONU Home Gateway Unit FTTH ONT With RF Output Interface
Model NO:JZCX0101R001
Product Descriptions:
* 1GE+CATV is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access.
* 1GE+CATV is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
* 1GE+CATV adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.
* 1GE+CATV is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
* 1GE+CATV is designed by Realtek chipset 9601D.
Main Features:
* Supports Dual Mode (can access GPON/EPON OLT).
* Supports SFU and HGU of EPON CTC 3.0 standard
* Supports GPON G.984/G.988 standards
* Support CATV interface for Video Service and remote control by Major OLT
* Support NAT, Firewall function.
* Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
* Support port mode of VLAN configuration
* Support LAN IP and DHCP Server configuration
* Support WEB Management
* Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode
* Support IPv4/IPv6 dual stack
* Support IGMP transparent/snooping/proxy
* In compliant with IEEE802.3ah standard
* Compatible with popular OLT (HW, ZTE, FiberHome...)
Technical Specifications:
|
Technical Item |
Details |
|
PON interface |
1 GPON/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm, Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
|
LAN interface |
10/100/1000Mbps auto adaptive Ethernet interfaces. 10/100/1000M Full/Half, RJ45 connector |
|
CATV Interface |
RF, optical power : +2~-18dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 82dBuV(-7dBm optical input) AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), >35(-10dBm) |
|
LED |
6 LED, For Status of POWER, LOS, PON, LAN, NORMAL, WARN |
|
Push-Button |
2, for Function of Power on/off, Reset |
|
Operating condition |
Temperature : 0℃~50℃ Humidity :10%~90%(non-condensing) |
|
Storing Condition |
Temperature : -40℃~+60℃ Humidity :10%~90%(non-condensing) |
|
Power supply |
DC 12V/1A |
|
Power Consumption |
<3W |
|
Net Weight |
<0.2kg |
Panel lights and Introduction:
|
Status |
Description |
|
|
POWER |
On |
The device is powered up. |
|
Off |
The device is powered down. |
|
|
LOS |
Blink |
The device doses not receive optical signals. |
|
Off |
The device has received optical signal. |
|
|
PON |
On |
The device has registered to the PON system. |
|
Blink |
The device is registering the PON system. |
|
|
Off |
The device registration is incorrect. |
|
|
LAN |
On |
Port is connected properly (LINK). |
|
Blink |
Port is sending or/and receiving data (ACT). |
|
|
Off |
Port connection exception or not connected. |
|
|
NORMAL |
On |
Input optical power is between -18dBm and 2dBm |
|
Off |
Input optical power is higher than 2dBm or lower than -18dBm |
|
|
WARN |
On |
Input optical power is higher than 2dBm or lower than -18dBm |
|
Off |
Input optical power is between -18dBm and 2dBm |
Applications:
* Typical Solution:FTTO(Office),FTTB(Building),FTTH(Home)
* Typical Service:Broadband Internet access, IPTV, VOD, CATV and Video Surveillance.
Package:
* Your inquiry related to our products or prices will be replied within 24hours;
* Well-trained and experienced staffs to answer all your enquires in fluent English;
* Protection of your sales area ,ideas of design and all your private information;
* 1 years warranty;
* Hardware and software OEM and ODM with over 30 hardware and software engieeners;
* Debugging and adjusting;
* Welcome to talk in details after sample test.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier