Packaging Details:box / case
We can design some special packaging according to customer's requirement.
Delivery Details:3~5 days after receipt of deposit for little orders.
FTTH Network Tool Kits portable one type fiber optic cleaver with high quality
It is a Mini type Fusion splicing machine and have our own intellectual property right of fiber adjustment technology.It adopts advanced PAS Fiber adjustment technology. Adopt four motors drive, have fiber adjustment function, it is not only used for FTTX project, but also can be used for the trunk line, it is a machine which is the smallest volume, the lightest weight, the most fast splicing speed.
Specification
product name | Fiber optical cleaver |
Adapt to optical fiber | Single-core silica optical fiber |
To adapt optical fibercoatingdiameter | φ0.25 & φ0.9 |
Adapt to the bare fiber diameter | 125μm |
Cutting the fiber length | 10 ~ 16 mm (φ0.25) 10 ~ 16 (φ0.9) |
Weight | About 280g |
Cutting angle adaptation value | ≤ 0.7 ° |
Dimensions | 58mm (W) × 57mm (D) × 53mm (H) |
Edge life | 3600 times |
Operating Method
1 large platen opening and closing lever lift open large platen fixture cover the blade slider pushed to the front side of device, waste fiber recycling the superstructure will automatically open;
2, with the stripped fiber clamp stripped fiber coating reserved for bare fiber length 35-45 mm, moistened with alcohol cotton wool or tissue paper wrap optical fiber, fiber clean. Wiping with cotton wool or tissue, do not use the same cotton wool or tissue paper to rub the second (Note: Please purity greater than 99% alcohol);
3, visual to the edge of the fiber coating layer is aligned with the cutter on the ruler (10-16 cm) appropriate scale, left the optical fiber into the fiber guide grooves require a bare fiber placed straight on the optical fiber pressure pad to determine the end of the fiber can be touched recycle the rollers;
4 Close the fixture cover platen, to promote the device blade slider, the blade dicing the lower surface of the optical fiber, and is free to slide to the other side, cut off the fiber;
5, left hand held onto the cutter right hand to open the large platen waste fiber will automatically be placed in the waste fiber collection box,;
6, With the left hand and hold the optical fiber while his right hand to open the fixture cover, carefully remove the fiber cut end face: the neat fiber cross-section not to touch and it is matter
7, Troubleshooting, cutting bad reasons may be:
1), fiber is not straight on the fiber-optic pressure pad;
2), the blade height is too high;
3), blade, sanding pad dust and other foreign matter
Structure
Packaging Details:box / case
We can design some special packaging according to customer's requirement.
Delivery Details:3~5 days after receipt of deposit for little orders.
Welcome to my company!
Shanghai Yogel Communication Equipment Co., Ltd. is a professional company engaged in optical fiber passive devices, fusion splicer & accessories and optical test instruments. We provide sales and services of patch cords, fast connector, fiber coupler, optical adapters and fiber splice closure. Based on competitive prices, high-quality products and innovative technology, we stand apart from the rest in domestic FTTH, the DTV head-ends and broadcast industry. In addition, we have obtained ISO9001, SGS, the State Administration of Radio, Film & TV network access for broadcast equipment certificates and carry out IEC and CE standard strictly.
Before Sale:
detailed products test report
related specifications
During Cooperation:
OEM Service Offered
Design Service Offered
Buyer Label Offered
After Sale:
Any problems on the product, please contact us
1.Are you a factory or trading company?
We are factory,locted in Shanghai,Welcome to our factory
2.Can we get a lower price? Any Discount?
Yes,price is not a problem,everything could be negotiated based on the quantity.
3.Can I get a free sample?
yes,our sample is free,so you just pay the freight.
4.OEM,ODM Service is available?
Yes,We have strong ability to offer customers ODM&OEM products of highest quality.
And it will requirement about your quantity.
5.For Trade Terms,such as payment and leadtime.
*Payment Terms:We mainly support T/T bank transfer,Paypal and Western Union
*Shipping Methods: EMS,DHL,Fedex,TNT,UPS,by sea or your own shipping agent
*Leadtime: Sample order,3-7work days; Bulk order 15-25work days(after your payment )
6.How about the Warranty?
There are 12 months for the warranty.