Factory Price FT-982 Semi-automatic dispenser with foot type manual switch
Note:Dear buyer,please provide plug and voltage ,Thanks a lot!!!
Technical Specification:
1.Power supply: AC 220V ± 10% / 50Hz 2.Power consumption: <8W 3.Air Source: Maximum 0.99MPa (clean dry air without lubrication) 4.Spit pressure adjustment range: 0.05MPa-0.99MPa 5.Spit time adjustment range: 0.01S--30S, adjustable DIP switches into 6.Combination, a variety of available time mode 7.Function Mode: Manual mode / automatic mode 8.Vacuum features: adjustable to 600 mm Hg negative pressure control 9.Repeatability and spit Frequency: Accuracy: ± 0.05% Frequency: 600 beats / min 10.Minimum discharge rate: 0.01mL
Two operating method:
(A) automatic operation (auto) (applicable to quantitative, non-timed dispensing) The switch to automatic auto position. Adjust the pressure and volume of the plastic, choose the right needles can control the flow of liquid material correctly. Every step on a foot switch, the liquid material will be in accordance with the glue to set automatic drip from the tip holes.
(B) hand-operated (manual) (applicable to non-quantitative, non-timed dispensing) The switch to the manual position. Adjust the air pressure and select the appropriate needles. Depress the foot switch, the liquid material will drip from the needle hole, release the foot switch to stop the liquid material drops out.