FSTB KSD305 Cut off thermostat for air conditioner parts
KSD305 series snap-action defrost thermostat is a kind of waterproof bimetal thermal protector. It is of single-pole single-throw structure and works under resistive load. Thermostat is enveloped by epoxy resin. The product series is widely used as heating compensated switch or automatic defrosting control switch in air-cooling frostless refrigerators.
Advantages:
- High durability
- No breakdown, no flashover.
- Every product will be tested, extremely high temperature pass rate.
- High precision.
- Water proof.
Parameter:
Use | Temperature control in the waterproof condition |
Appliance | Refrigerator/ air-conditioner/ freezer |
Reset type | Automatic |
Material | brass base |
Amperage | 5A/10A/16A |
Operating temperature range | -30°C-120°C |
Waterproof grade | IP54 |
Environment temperature | - |
Limit of the tolerance(OFF) | ±3°C |
Limit of the tolerance(ON) | ±5°C |
Wire | Color: Black/Red/Blue/Brown diameter:0.75mm2 / 0.5mm2 Material: Fluorine plastic braided Length: Customize |
Approvals |
|
Dimension of the main body:
Installation and Direction for Use:
- In the event that the thermostat is employing contact temperature sensing, its cover shall be adhered to the installation position of a controlled appliance.
- The cover shall show no cave-in or deformation resulting in operating temperature variation or bad influence on other performances.
- No excessive force shall be applied to working parts, to prevent them from defects such as cracking base, distorted terminal and wire lead coming off.
- The plastic envelope must be kept intact in the course of installation and usage.
Major series of snap-action thermostats are as follows:
Series | Diameter of bimetal disc | Max. operating Temp. | Max. | Switch structure
| Service purposes |
rated | |||||
current | |||||
KSD301
| F12.8mm (1/2″) | 280°C
| 16A
| SPST
| Temperature control and overheating protection for low-duty electric heating applications. |
KSD301-U
| F12.8mm (1/2″) | 280°C | 16A
| SPST
| One shot type fuse for low-duty electric heating applications. |
KSD302
| F22.25mm (7/8″) | 125°C | 25A
| SPST
| Temperature control and overheating protection for high-duty electric heating applications. |
KSD303
| F12.8mm (1/2″) | 50°C | 10A | SPST | Defrosting and temperature compensation for refrigerator. |
KSD305
| F22.25mm (7/8″) | ||||
KSD307 | F12.8mm (1/2″) | 220°C | 20A | SPST | PTC power cut out for electric heater, commercial appliance |
KSD309
| F12.8mm (1/2″) | 280°C
| 16A
| SPST
| Temperature control and overheating protection for high temperature heating applications. |
KSD310
| F19mm (3/4″) | 50°C | 35A
| SPST
| Defrosting for big current refrigerator, air conditioner or other commercial cooling appliances |
KSD314
| F19mm (3/4″) | 220°C | 45A
| SPST
| Temperature control and overheating protection for big current heating applications. |
KSD315 | F19mm (3/4″) | 125°C | 16A | DPST | Manual reset for water heater protection |
Getting more information about our defrost thermostat, refrigerator thermostat, air conditioner thermostat, please refer to our website: www.thermostat-gb.com
AWE 2018 - Appliance & Electronics World Expo 2018
Getting more information about high temperature protector and limit switch, please refer to our website: www.thermostat-gb.com
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier