FRP / GRP Cable Ladders, Trays and Support System
FRP / GRP Cable Ladders, Trays and Support System
Fiberglass reinforced plastic (FRP) anti-corrosion cable bridge or tray is made of glass fiber, epoxy resin and other special materials, it has reasonable mechanical structure, light weight,high strength, strong corrosion resistance, flame retardance, aging resistance and good insulation performance, it can be used in a large range of temperature and the environments of high humidity, heavy acid and or heavy alkali. the service life is 5-6 times of the steel bridge, the installation distance of one ton of FRP cable bridge or tray is 1.5 times of the steel bridge with same specification and same weight.FRP cable bridge can be overhead laying; erected under the beam or floor slab,can be fixed laterally by indoor and outdoor walls, posts, tunnels, cable trench walls., can also be installed in the open air.
|
Product name |
Fiberglass / FRP cable tray |
|
Material composition |
FRP / GRP |
|
Usage |
Cold and hot water supply, Heating system |
|
Trade terms |
EXW, FOB, CNF, CIF |
|
Eco-friendly |
Yes |
|
Sample provide |
Yes |
|
Sample time |
1-3 days |
|
OEM |
Yes |
|
Shipping way |
By sea/land |
|
Product show |
|
Types of shap |
| Spatial layout diagram of cable tray |
Notes:
1. Each ends of cable trays should be connected by 6 holes when the height is 50-100 mm; when their height is 150-220 mm, holes should be 12.
2. Support distance: it should not be more than the support distance and load capacity allowed by load curve.
3. Width of cable trays: some remarkable room should be served when you choosing the cable trays width, in order to add cables in the near future.
4. Laying separately: when electric cables and controlling cables are few, they could be laid in the same cable tray, as long as they are laid separately by clapboard.
5. Fixing cables: when collecting cable trays are laid horizontally, connections among trays should be set on 1/4 of skip distance, horizontal cables should be fixed every 2 meters, and vertical cables should be fixed every 1.5 meters.
6. cable trays device should have another grounding equipment.
| Specifications |
B:Width H:Height TH:Thickness
L=2000mm or 4000mm or 6000mm all can
| Types | B(mm) | H(mm) | TH(mm) |
|
|
100 | 50 | 3 |
| 100 | 3 | ||
| 150 | 100 | 3.5 | |
| 150 | 3.5 | ||
| 200 | 100 | 4 | |
| 150 | 4 | ||
| 200 | 4 | ||
| 300 | 100 | 4 | |
| 150 | 4.5 | ||
| 200 | 4.5 | ||
| 400 | 100 | 4.5 | |
| 150 | 5 | ||
| 200 | 5.5 | ||
| 500 | 100 | 5.5 | |
| 150 | 6 | ||
| 200 | 6.5 | ||
| 600 | 100 | 6.5 | |
| 150 | 7 | ||
| 200 | 7.5 | ||
| 800 | 100 | 7 | |
| 150 | 7.5 | ||
| 200 | 8 |
| Advantages |
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.
Installation Notice:
Bends, Risers, T Junctions, Crosses & Reducers can be made from ladder cable tray straight sections flexibly in projects.
Trays shall be supported at a maximum span of 2m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer.
Cable Tray systems can be safely employed in places where the temperature ranges between -40°C and +150°C without any change to their characteristics.
HEBEI DONGDING CHEMICAL TRADE CO.,LTD is made up of several manufacturing enterprises, is a high tech enterprises that collection of sale for project consulting, designed and developed, engineering design, materials purchasing, transport of goods, equipment installation and training debugging, and has passed ISO 9001:2015 international quality management system certification, our company is the national foreign trade, the general administration of customs approved the company has import and export right.
We mainly produce potassium sulfate production equipment,FRP tank production equipment,FRP pultruded products(include FRP Square tube/Rectangular tube /Round tube /Rod / U channel / I beam / Flat / Angle /Decking panel /Plum blossom tube /Ladder carling /Ladder crossgirder ),FRP pipe, FRP tank,FRP septic tank,FRP water tank,FRP grating,Cooling tower,FRP scrubber,Cable tray,FRP cover,FRP flange,FRP rock bolt,FRP handrail and so on,Looking forward to your visit and communication!
>> Packing: According to customer's demand
>> Delivery: Within 30 days after the payment was received.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier