Output power, 1 kHz, 0.1 % clipping
8 Ω dual channel drive 260 W
4 Ω dual channel drive 400 W
Signal to noise (20 Hz -20 kHz) 100 dB
Input sensitivity 1.2Vrms
Voltage gain (8 Ω) 32.2 dB
Output circuit B level
Power requirements (1/8 power, 6.3 A, 6 A 11.5 A pink noise when 4 Ω 220 V AC)
Distortion (1 dB below the rated power, 1 kHz) 8 Ω, less than 0.02%
4 Ω, less than 0.05%
Frequency response 20-20kHz, +0, -1dB
Dynamic headroom, 4 Ω 2 db
Input impedance exceeds 20K ohm (balanced or non-balanced)
Max input level +6 dB
Input connector, 3-pin XLR for each channel, balanced, parallel
Output connector, each channel SPEAKON, terminal
Amplifier and load protection for short circuit, open circuit, thermal and RF protection
Load protection for DC faults
This series of power levels matches the most commonly used speakers in the entertainment industry.
Load is 4 Ω and 8 Ω speaker system one of the biggest real net optimization.
Input: XLR, 1/4, TRS socket, compatible with any audio source.
Output: SPEAKON combo SPEAKON 2-pin and 4-pin plugs (connect only 2 pins).
The terminal supports all other speaker wiring systems.
Intelligent protectors automatically protect amplifiers and speakers from damage caused by temperature rise or overvoltage without the need to turn off playback.
Front panel LEDs monitor power, signal and clipping.
Built-in subwoofer/satellite frequency divider.
Built-in three core microprocessor, lock screen, eight kinds of marshalling scenario storage, frequency shift and other functions.
OLED dot matrix screen, friendly man-machine interface.