Company introduction
Wuxi susui Fluorine Plastic Products Co., LTD ia a specialized fluorine plastic products research and development manufacturer. Professional fluoride in the plastic products developed and production with strong technical strength and self-developed products. The company is gained ISO 9001:2000 quality system certification; company’s products have passed testing the authority of the state sector in the line with enironmental protection(ROSH ) requirements.
The main products are:
(1) PFA transparent tube, PFA insulation tube ,PFA heat shrink tube , PFAcoil pipe , PFA corrugated / bellows tube, PFA sheet , PFA film , PFA welding rod.
(2) FEP/F46 transparent tube, FEP insulation tube, FEP heat shrink tube, FEP coil tube, FEP corrugated / bellows tube, FEP film, FEP rods.
(3) PTFE/F4 tube.
At the same time, all the fluorine plastic tube and products can be processed in accordance with customer requirements.
Characteristic:
Excellent high and low temperture resistance , noncombustible , good tensile strength and so on .They are widely used in aerospace, apparatus, medical treatment ,electronics ,telecom ,petro-chemical, metallurgy electrical powder, home electronics, and decoration illumination.
Our company always adhere to the priciple of "Customer First, Credit First", we warmly welcome wordwide friends to do business with us. We will offering high quality products , creating maximum benefit to our customers
FEP/F46 heat shrink tube
Usage:
1. liquid crystal equipment
2. single-core cable with one-side luminescence
3. heatexchanger, steam piping
4. conveyer pipe with high purity reagent
5. conveyer pipe with various corrosive media
6. lepeth-sheath wire and cable with various frequency
characteristic:
1. High and low temperature preservation
2. -200--200°c high temperature no-begriming and no-stagnantin tube
3. security and insulation
4. under 60Hz-60MHZ high and low temperature , permittivity is 2.1
5. if firing and will still insulate
6. Volum resistance>1018Ω
7. no poison with physical inertia
8. high diaphaneity,lowest refractive index in plastic material
Specifications
ODmm | IDmm | g/m |
2.00-2.80 | 1.6 -2.30 | 2.45-4.35 |
3.00-3.9 | 2.00-3.30 | 8.52-7.36 |
4.00-4.90 | 2.00-4.50 | 20.45-6.41 |
5.00-5.50 | 3.00-5.00 | 27.27-8.95 |
6.00-6.90 | 3.00-6.50 | 46.01-9.13 |
7.00-7.60 | 5.00-7.20 | 40.90-10.09 |
8.00-8.20 | 5.00-7.40 | 66.47-21.27 |
9.00-9.60 | 6.00-9.00 | 76.69-19.02 |
Specifications
Internal diameter Pre-shrink | Internal diameter Post-shrink | Wall thickness Post-shrink | Length (M) |
3.8 | 2.7 | 0.2-0.25 | 1 |
4.5 | 3.3 | 0.2-0.25 | 1 |
5.5 | 4.3 | 0.2-0.25 | 1 |
7.0 | 5.1 | 0.2-0.35 | 1 |
7.9 | 6.0 | 0.2-0.35 | 1 |
10.6 | 7.4 | 0.3-0.45 | 1 |
12.5 | 8.8 | 0.3-0.45 | 1 |