FC100A 6 Cylinders Fuel Injector Tester and Cleaner Machine diagnostic tools

FC100A is an advanced electromechanical product which can clean and test injectors by simulating engine working conditions.

It can also perform cleaning on the injectors and fuel supply system on vehicle.

1. One-piece design
2. Check the injection situation and injection volume of the fuel injection nozzle:
3. Leakage detection, nozzle cleaning;
4. Observation of injection angle and cleaning inside of injector;
5. Simulation of idle, medium speed and high speed working state of engine;
6. Simulation of engine at any rotation speed and can adjust at any speed;
7. The simulation and arbitrary adjustment of the pulse width of the injection;
8. Adjusting the detection time arbitrarily:
9. Pressure checking can be adjusted arbitrary and stepless;
10. Functions to check time to time and time to count;
11. Built-in ultrasonic cleaning machine, semi-automatic operation
12. Restoring oil automatically: The detection liquid in the glass tube is automatically returned to the tank by pressing the button
13. Detection range: Multi-point injection, mechanical injection nozzles (including high and low resistance nozzles, current and voltage nozzles)

Maximum number of testing cylinders: 6 cylinders

Operating temperature: -10℃~+40℃

Working voltage: 220V 50HZ

Tank capacity 4L

The test tube capacity 120 ml

Ultrasonic frequency 25KHz

Ultrasonic power 100W

Analog revolution: 0~9950 r/min

Adjustment step: 50 r/min

Pulse width: 1~20 ms

Adjust step size: 0.1ms

Number of fuel injection: 0~9999

Adjust step length: 1 time of oil injection 0~9999 seconds

Adjust step length: 5 seconds

Oil pressure: 0--7 kg

Regulation: stepless regulation

Net weight: 32 Kg

Gross weight: 37 kg

Size: 500*460*1120 mm

Package size: 530*490*730 mm