F3836 4G SIM Card Router data function 3G WCDMA HSDPA HSUPA HSPA Modem with wifi
General introduction:
F3834 LTE/WCDMA WIFI ROUTER is a kind of cellular terminal device that provides large data transmission function by public LTE/WCDMA network.
F3834 4G WIFI Routeradopts high-powered industrial 32-bits CPU and embedded real time operating system.F3834 4G WIFI Routersupports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration.
1. 3G(WCDMA/HSDPA/HSUPA/HSPA+ ) network
2. Public WIFI hotspot & support 20~40 users at the same time
3. Strong WIFI signal & available for surrounding 100 meters
4. RS232/485(or RS422) interface
5. 4 LAN ports & 1 WAN port
6. Smooth video transmission
7. Support APN/VPDN & VPN
8. Support full ptotocol(TCP/IP, UDP, etc.)
WIFI Specification
Item | Content |
Standard | IEEE802.11b/g/n |
Bandwidth | IEEE802.11b/g: 54Mbps (max) IEEE802.11n: 300Mbps (max) |
Security | WEP, WPA, WPA2, etc. WPS (optional) |
TX power | 21.5dBm(11g),26dBm(11b) |
RX sensitivity | <-72dBm@54Mpbs |
Interface Type
Item | Content |
WAN | 1 10/100 Mbps WAN port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection |
LAN | 4 10/100 Mbps Ethernet ports(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection |
Serial | 1 RS232(or RS485/RS422) port, 15KV ESD protection Data bits: 5, 6 ,7, 8 Stop bits: 1, 1.5, 2 Parity: none, even, odd, space, mark Baud rate: 2400~115200bps |
Indicator | "Power", "System", "Online", "Alarm", " Local Network ", "WAN", "WLAN","Signal Strength" |
Antenna | Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional) WIFI: Standard SMA male interface, 50 ohm, lighting protection(optional) |
SIM/UIM | Standard 3V/1.8V user card interface, 15KV ESD protection |
Power | Standard 3-PIN power jack, reverse-voltage and overvoltage protection |
Reset | Restore the router to its original factory default settings |
USB | Standard A type USB host interface (reserved) |
Designed for Industrial Application
1 High-powered industrial cellular module
2 High-powered industrial 32bits CPU
3 Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled
4 power-on/power-off mode(optional)
5 Housing: iron, providing IP30 protection.
6 Power range: DC 5~35V
Standard and Convenience
1 Support standard RS232(or RS485/RS422), Ethernet and WIFI port that can connect to serial,
2 Ethernet and WIFI devices directly
3 Support standard WAN port and PPPOE protocol that can connect to ADSL directly
4 Support intellectual mode, enter into communication state automatically when powered
5 Provide management software for remote management
6 Support several work modes
7 Convenient configuration and maintenance interface(WEB or CLI)
High-performance
1 Support multiple WAN access methods, including static ip, DHCP, L2TP, PPTP,PPPOE,3G/HSPA/4G.
2 Support double link backup between TD-SCDMA and WAN(PPPOE, ADSL) (optional)
3 Support VPN client(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN version)
4 Support VPN server(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN version)
5 Support local and remote firmware upgrade,import and export configure file.
6 Support NTP, RTC embedded.
7 Support mulitiple DDNS provider service.
8 Support VLANs, MAC Address clone, PPPoE Server
9 WIFI support 802.11b/g/n. support AP, client, Adhoc, Repeater, Repeater Bridge and WDS(optional) mode.
10 WIFI support WEP,WPA,WPA2 encryption,Support RADIUS authentication and MAC address filter.
11 Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
12 Support APN/VPDN
13 Support DHCP server and client, firewall, NAT, DMZ host , URL block, QoS, ttraff,statistics, real time link speed statistics etc.
14 Full protocol support , such as TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP, SSHD, etc.
16 Schedule Reboot, Schedule Online and Offline,etc.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier