F2464-H3 industrial GSM 3G RTU remote terminal unit RS232/RS485 for SCADA

Design for Industrial Application

u       High-powered industrial cellular module

u       High-powered industrial 32 bits MCU

u       Support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest

u       Embedded Real Time Clock(RTC) circuit which can realize timing online/offline function

u       Housing: iron, providing IP30 protection.

u       Power range: DC 5~35V

Stability and Reliability

u       Support hardware and software WDT

u       Support auto recovery mechanism, including online detection, auto redial when offline to make it always online

u       Support intellectual mode, enter into com

munication state automatically when powered on

u       Provide management software for remote management

u       Support several work modes

u       Convenient configuration and maintenance interface

High-performance

u       8 analog input channels(resolution:16bit)Input voltage(0-5V),Input current(0-20mA), Sampling rate(1.365kSPS).

u       4 relay outputs(5A/30VDC,5A/250VAC).

u       4 optocoupler isolated outputs(10mA).

u       8 Digital inputs(“0”:0-3.3V,“1”:5-24V),  Contains all the way count of function(1KHz) 

u       2MB SPI FLASH for data log.

u       Support dual data centers, one main and another as backup

u       Support multiple data centers , it can support maximum 5 data centers

u       Support multi-center multi-function(for example: one data center is MODBUS RTU protocol function, another data center is RTU extended protocol function)

u       Support multiple online trigger ways, including SMS, ring and data. Support link disconnection when timeout

u       Support dynamic domain name(DDNS) and IP access to the data center

u       Support RS232/RS485 MODBUS RTU protocol.

u       Support TCP MODBUS RTU protocol using TCP2COM software that converts TCP to virtual serial port.

u       Support 8 digital inputs and 8 analog input manual query and automatic report.

u       Support 4 optocoupler isolated output ports and 4 relay outputs controlled via MODBUS RTU protocol.

u       RS232/RS485/RS422 port: 15KV ESD protection

u       SIM/UIM port: 15KV ESD protection

u       Power port: reverse-voltage and overvoltage protection

u       Antenna port: lightning protection(optional)

Standard and Convenient

u       Adopt terminal block interface, convenient for industrial applications

u       Support standard RS232 and RS485(or RS422) port that can connect to serial devices directly

u       TTL logic level RS232 interface can be customized

 u       Support pulse counter initiate value configurable, Its realtime value can be queried via MODBUS RTU protocol

u       Support RTU extended protocol.

u       Acquisition data(8 analog inputs and 8 digital inputs) is reported periodically via RTU extended RTU protocal.

u       Support RTU extended protocol. Reporting mode can be selected. there are three reporting mode, including Network only, SMS only and Main network SMS backup(it uses SMS. when network connect fail)

u       Support RTU extended protocol.When reporting acquisition data failure, acquisition data are saved to 2M byte SPI FALSH.

u       Support RTU extended protocol. The data center can query acquisition data actively

u       Support RTU extended protocol. It has counter function that the initial value of the timer is set and the value of the timer is queried

u       Support RTU extended protocol. It has the data center and RS232/RS485 transparent transmission function.

u       Support RTU extended protocol. it has alarm function, alarm information is reported automatically(alarm trigger conditions can be configured independently).

u Support RTU extended protocol. Can remotely reboot RTU

u Support RTU extended protocol. Can remotely configure the parameters

u Support RTU extended protocol. The remote upgrading parameters can be configured, RTU support remote upgrade firmware.

u Alarm function: Alarm information are reported through RTU extended protocol , SMS, or both SMS and RTU extended protocol

u When alarm information are reported through SMS, alarm number and alarm content of each channel can be configured independently

u The remote upgrading parameters can be configured by SMS. RTU upgrade the firmware immediately when it received the upgrade command.

u Built-in industrial clock, the acquisition time can be recorded through this clock

u Network is automatically connected, when device power on. Network is automatically reconnected when network is offline.

u Scheduled turn on and turn off power function make the device work in low-power mode

Cellular Specification

Environmental Limits

  Operating Temperature:  -25~+65ºC(-13~+149°F)

  Extended Operating Temperature: -30~+75ºC(-22~+167°F)

Storage Temperature:  -40~+85ºC(-40~+185°F)